ELASTIC scraper

ELASTIC scraper

Product info:

Highly elastic, metallic-colored filler with extremely high liability, heat resistant to 180 ° C.

• High temperature resistance
• Extremely high elasticity, and therefore also for swinging claimed parts suitable 
• Good adhesion to almost every vehicle in the area occurring plastic parts 
• Rapid hardening (15-30 minutes) 
• Slight tear and high abrasion 
• Resistant to water, fuel, mineral oils, dilute acids and alkalis.

Applications:

• To repair damaged bodies, the strong weather influences are suitable for Baking enamels.

Processing:

1. The substrate must derusted, defatted, dry, dust-free and easy angerauht be. Altlackierung not cured or thermoplastic acrylic paint must be removed.

2. To a quantity of 100g spatula are 1-4 g hardener admitted red paste (1 g or approximately 4-5 cm from the Schraubtube).

3. Both Kompnenten until blend until a homogeneous color is reached. The mixture remains 2-6 minutes for processing.

4. After 15-30 minutes, the hardened filler edited (sanding, drilling, milling).

5. Heat accelerates, cold hardening delayed.

6. The filler surface can be edited with any commercially available fillers and coatings to be revised.

7. Devices can work with nitro-dilution cleaned.

Storage:

12 months from the date of production in unopened packaging in cooler (5 degrees C to 25 º C) and dry storage. Dawn cans well sealed and consume the short term.

Delivery:

Dose including Häter (12 doses. Per carton)

Color:

metallic gray

>> Technical Data <<