Ottoseal S27 Silicone Food

Ottoseal S27 Silicone Food

Product Info:

Ottoseal S27 Food silicone tested and approved for use in drinking water and food sectors, according to NSF 61st Ottoseal S27 has a good chemical resistance to dilute acids.

• Tested and approved for use in drinking water and food sectors

• Good chemical resistance, such as compared to diluted acids

• Acetate interconnection RTV-1 silicone sealant

• High Kerbfestigkeit

• UV Resistance

• Very good weathering and aging resistance

Standards and tests:

• Meets the KTW recommendations of the Federal Department of Health

• Tested and approved by the Hygiene Institute Gelsenkirchen

• Meets the requirements of the DVGW worksheet W270

• Tested to NSF 61

Applications:

• Sealing in the drinking water sector, such as for drinking water tanks and filters

• Sealing in the food sector, such as dairies, slaughterhouses, food and beverage factories, kitchens, etc.

• Seal the sterile, e.g. in surgical rooms

Processing:

OTTOSEAL S27 is ready to use and, by appropriate opening of the
This container is used immediately. Joint edges and surfaces must be dry, clean, grease-free and sustainable. Moisture in the ground can cause the formation of mineral surfaces from efflorescence, thereby reducing the adhesion of silicone sealant wird.Im underwater area unglazed ceramic tiles with OTTO Primer 1218, or glazed ceramic surfaces pretreated with OTTO Primer 1216th When using mineral substrates without the Dauernassbeanspruchung OTTO Primer 1105th For absorbent mineral surfaces in Dauernassbereich or underwater area, we ask the
Information is in tech. Sheet to note the OTTO Primer 1218, or to consult with the Otto Chemical Application! Metal surfaces such as for example Steel pretreatment primer in principle with OTTO 1216th On plastics such as polyester, GRP, etc. is a good cross liability existed without primer. PVC is OTTO Primer 1217 To pretreat with other plastics please contact us or your own tests. Primer and primer not pass on the joint faces out, masking tape, if necessary. Non-ferrous metals and unprotected sheets can be oxidized by the acetic acid produced during curing. Containers may not (depending on joint depth at least 4 days) filled with water only after complete curing of OTTOSEAL S27. Because of the numerous factors that may affect processing and application of
Users always make a sample processing and application.
The concrete Aufbrauchsdatum is printed on the packaging printing and observed.

Processing temperature: +5 º C to +35 º C.
Affixing Method: By Hand Press, pneumatic or battery ausspritzen pistol.
Cleaning: With Terpentinersatz before curing, then with silicone or mechanically removed.
Smoothing: With Glättmittel and Abziehspachtel before skin formation.

Storage:

12 months from production date in ungeöffneterVerpackung in cooler (+5 º C and +25 º C) undtrockener storage. Gutverschließen opening cans and short supply.

Delivery:

310 ml PE-cartridge (20 KTU. Per carton)

Colors:

gray, transparent, white

>> Technical Data <<

>> Safety data sheet <<

>> Health Effects NSF 61 <<