Sikabond T2

Sikabond T2

Product Info:

SikaBond T2 of construction adhesive in construction and perfect for sticking in the indoor and outdoor use. SikaBond T2 construction adhesive is suitable for the elastic bonding of concrete, wood and ceramics to each other and with other common building materials such as fiber cement, drywall, steel, aluminum, rigid PVC, fiberglass, polyurethane and mineral wool. Thus can be perfectly bonded with structural adhesive SikaBond T2 window sills, stair treads, bumper guards, door and signage, as well as prefabricated structural bonding in many other materials.

• 1-component, ready to use
• Solvent-free and very low emissions, EMICODE EC 1PLUS R
• Odorless
• High resistance to weathering and aging resistance
• Wide range of adhesion
• High initial tack
• Sound-absorbing
• Vibration-resistant
• Underground Balancing
• Non-corrosive (to avoid galvanic corrosion)
• Sandable

Areas of application:

 SikaBond-T2 is used as a structural adhesive in construction and is suitable for bonding both indoors and outdoors. SikaBond-T2 is particularly suitable for the elastic bonding of concrete, wood and ceramics to each other and with other common building materials such as fiber cement, drywall, steel, aluminum, rigid PVC, polyester, polyurethane and mineral wool. Thus, with SikaBond-T2 window sills, stair treads, bumper guards, door and signage, structural bonding in prefabrication and many other materials to be bonded.

Chemical resistance:

Duration Resistant to:
- Water
- Many aqueous cleaners
- Seawater
- Kalkwasser
Short-term resistance against:
- Mineral oils and vegetable and animal fats
Not or only short-term resistance:
- Organic solvents (esters, ketones, aromatics) and alcohol
- Solvents, paint thinners and their
- Strong acids and alkalis

Inspection / approval:

EMICODE EC 1PLUS R, very low emission

Surface preparation:

The substrate must be sound, dry, oil-and fat-free and free of loose particles or dust. Sintered layers and laitance must be removed.

 SikaBond-T2 has very good adhesion to many clean and solid surfaces. For optimum adhesion and high-stress applications with high static loads or extreme weather loads cleaner and primer must be used. If in doubt, please perform preliminary tests.
Adhesive surface bonding agent
Concrete, masonry, weathered wood Sika Primer-3 N
Aluminum, stainless steel A + Sika Primer-3 N
Rigid PVC Sika Primer-215
Powder coating, 2-K coatings (UP, PU, ​​EP) A + Sika Cleaner-1

Before each turn of Primera, the adhesive surfaces to be cleaned!
Please note: Primers are exclusively to be used as adhesion promoters. They
either replace the cleaning of bonding surfaces nor are they able to eliminate the
To improve strength.

Usage:

In applying the triangular nozzle (10 x 8mm) ~ 44 ml per running meter. This yields about 6.5 m per 300 ml cartridge.

Application instructions:

SikaBond AT-14 is processed by hand pressing gun, air gun or gun battery. Apply a triangular bead of adhesive to the prepared substrate (~ 10 mm high and ~ 8 mm wide). If necessary spread with a spatula. Press firmly on the processing part of the adhesive. If necessary, use SikaTack-panel assembly line to fix. The adhesive thickness must ever lie to Anorderungen or flatness of the surface between 1 and 5 mm. Fresh, uncured adhesive must immediately with a clean cloth and, if necessary, with Sika Remover-208 or Sika T TopClean be removed.

Storage:

12 months from date of manufacture in a cool, dry place in original, undamaged containers at temperatures between
+ 10 ° C and 25 ° C.

Delivery form:

300 ml cartridges (12 cartridges per box)

Color:

white, black,