Perimeter Kleber
Product info:
PERIMETER GLUE is a ready-to-use, self-polyurethane adhesive for bonding the rational use of polystyrene foam slabs as insulation and perimeter insulation and Drähnelementen. PERIMETER GLUE is solvent-free and is characterized by good adhesion between the perimeter and insulating the basement wall surfaces such as concrete, bitumen and coated thick coatings of bitumen. The high yield of about 14 m2; basement wall surface per 750ml can and the good beginning of liability simplify the installation of perimeter insulation much!
Applications:
* Bonding of polystyrene foam insulation boards as a perimeter according to DIN 4108-2. (Not suitable for drückendem water!)
* Bonding Dämm-/Drähnelementen
Processing:
Can fixed to unscrew the screw gun and pistol can with the bottom about 30 x shake vigorously so that the canned contents are well mixed and the adhesive quality is optimized. By adjusting the strand of the glue gun set.
The pistol in the application as vertically and by pressing the clicker PERIMETER KLEBER from bottom to top, with a streak of Strangford distance of about 25 cm (Min. three strands per end, or at least two boards short strands!) On the insulating panel or the basement wall spray. The Pistolendüse is not on the insulating panel to the basement wall established. Between Pistolendüse and insulating panel / basement wall during the spraying is a distance of 1-2 cm observed. Shortly thereafter wait and within 8 minutes of the insulating panel to vigorously press the basement wall. In order to avoid a fall, we recommend that the insulation panels easy to fix. All open joints in the insulation with PERIMETER KLEBER fill. About person, fully hardened glue off with a knife.
Processing temperature: 5 degrees C to 35 degrees C (adhesive surface temperature)
15 ° C to 25 ° C (canned temperature) If necessary tin in the cool or warm water slowly to the optimum temperature.
Cleaning: with pistols and foam cleansers before curing, then only mechanically removable.
Storage:
12 months from the date of production in unopened packaging in cooler (5 degrees C to 25 º C) and dry storage. The cans must be stored below the bonding of Sprühventiles ruled out. Dawn cans well sealed and consume the short term.
Delivery:
750ml Aerosolsprühdose (12 cans per case)
Color:
yellow
>> Technical Data <<
Schaumpistole Ergo
Item number: ergo 
Delivery beginn within 24hrs
Leichte Kunststoffpistole Schaumpistole / Metallpistole Schaumpistole. Hervorragend einstellbar durch extra große Stellschraube. Mit Metallabzug. Stabiles Gerät für eine einfache Handhabung. Ergonomischer Handgriff mit Gummierung für einen hervorragenden halt.
Skelettpistole HS 84S
Item number: 1312 Delivery beginn within 24hrs
Handwerker Kartuschenpistole für 310 ml-Kartuschen. Kartuschenpistole mit sechskant Schubstange und Nachlauf-Bremse. Kartuschenpistole mit gebogener Schubstange, zum einhängen z.B.an Leitern.
Schaumpistole Easy Gun
Item number: easy gun Delivery beginn within 24hrs
Kleine, leichte aber stabile Metallpistole Schaumpistole. Die Short Gun Schaumpistole, besticht durch ihr geringes Eigengewicht so wie ihre Handlichkeit. Optimal für den Heimwerker!
1K Insulation Adhesive
Manufacturer: Soudal
Item number: dämkle Delivery beginn within 24hrs
Information:
INSULATION ADHESIVE is a high quality, solvent free, one-component polyurethane adhesive foam (PU foam) for efficient, clean, economical and safe permanent bonding of thermal insulation panels in the roof area, ideal for thermal insulation. This innovative adhesive foam at low temperatures has a high initial adhesion, is also suitable for vertical bonds and similar irregularities from optimal. With its fast curing, the adhesion after 2 hours are revised. Compared with conventional polyurethane roof adhesives has one with INSULATING ADHESIVE an enormous weight reduction and space savings and overall a 30% working time reduction. INSULATION ADHESIVE should be metered precisely and economically than enough for up to approximately 14 m² insulation.
Surface Activator
Manufacturer: Soudal
Item number: suract Delivery beginn within 24hrs
SURFACE ACTIVATOR Clean Primer ist ein Reiniger, Entfetter und Primer in Einem. Der Aktivator bereitet glatte Oberflächen von Kunststoffen, Metallen und Beschichtungen vor und verbessert so die Haftung des Klebstoffes / Dichtstoffes . Ideal geeignet für Silikon, Polyurethan, MS Polymer und SMX Technologie.
All items can be at any time, simply and conveniently
order here on our website, online.
Our telephone order service is available at:
+49(0)2832-973665
Fax orders should be addressed to:
+49(0)2832-973497
Fax Order Form
Orders by email please send to:
info@dichtstoffhandel.de