Ottoseal S12 drinking silicone, Ottoseal S12 drinking silicone, Bauschaum,Ottocoll,Ottoseal, PU Schaum, Sanitärsilikon,Silirub,Sikaflex im Shop kaufen

Product Info:

With Ottoseal S 12 we have a sealant that is suitable for the seal between the ceramic surfaces in drinking water.

Amine curing silicone sealant
Tested and approved for drinking water applications
Good chemical resistance, for example to diluted acids and alkalis
High tear resistance
UV-resistant
Good compatibility with mineral surfaces
Very good water, weathering and aging resistance Standards and tests:
Meets the KTW-recommendations of the Federal Health Office. Tested and approved by the Hygiene Institute Gelsenkirchen
Meets the requirements of the DVGW worksheet W270. Tested and approved by L. V. H. T. meal.

Applications:

Sealing in drinking water, e.g. of drinking water tanks and filters and on mineral surfaces
Sealing in the food sector, for example in dairies, abattoirs, beverages and food factories, catering kitchens etc.

Processing:

Preparation of Surfaces Compatibility: Paints, varnishes, plastics and other coating materials must comply with the sealant, adhesive be compatible.
Cleaning: Surfaces must be cleaned and any contaminants, such as release agents, preservatives, grease, oil, dust, water, old sealant, adhesives and other substances affecting the liability will be removed. Cleaner for non-porous
Surfaces: Cleaning should be with OTTO Cleaner T, alcohol or other
Cleaners in acetone or isopropanol and with a clean, lint-free cloth made. Cleaner for porous surfaces: Porous surfaces must be mechanically, eg with a steel brush or a grinding wheel to be cleaned of loose particles.
Liability and pre OTTOSEAL products are high quality and high
specialized products that are characterized by excellent adhesion on many substrates without priming. Due to the very specific applications and the variety of materials, the use of primers to be secured by appropriate tests.
Application of primers: If the application of a primer is necessary, should contribute to achieving an optimal outcome following procedure be followed: Application of the primer with a lint-free cloth to non-porous surfaces (metals), or with a brush for porous surfaces (concrete). Apply the primer evenly thin and excess primer is a film that affects the liability.
· Primers and OTTOSEAL / OTTOCOLL sealants / adhesives Note:
Otto Chemistry Primers were designed to OTTOSEAL / OTTOCOLL matched sealants / adhesives to ensure optimum adhesion and optimum mechanical properties. The interaction between primers and Otto Chemical OTTOSEAL / OTTOCOLL sealants / adhesives and mutual tolerance was released by the Otto chemistry laboratory.

Storage:

12 months from date of manufacture in ungeöffneterVerpackung in cool (+5 º C and +25 º C) undtrockener storage. Opened container gutverschließen and short-term use.

Form:

310 ml PE-cartridge (20 KTU. Per carton)

Colors:

transparent

>> Technical Data <<

>> Safety data sheet <<

Ottoseal S12 drinking silicone

Art-Nr.: s12

Product Specification