Product information Ottoseal S10 silicone adhesive:
Ottoseal S 10 construction adhesive is an extremely UV-resistant and tear-resistant construction adhesive and sealant. X-ray protective glass for bonding and sealing glass elements. Ottoseal S 10 construction adhesive is particularly suitable for grouting glass elements, sloping glazing, roof glazing and conservatories.
- Neutral cross-linking 1K silicone adhesive and sealant
- Very good weather resistance, aging resistance and UV resistance
- Very good adhesion to many substrates, sometimes in conjunction with primer
- Non-corrosive
- High notch and tear resistance
- Compatible with PVB foils in laminated safety glass units
Areas of application for gluing Ottoseal S10 silicone:
Sealing of connection joints and expansion joints in building construction
Also suitable for weather-resistant sealing (weather sealing) on glass facades (structural glazing), sloped glazing, roof glazing and conservatories
Suitable for grouting glass elements made of VSG and ESG. Please contact our application technology department for this
Installation of X-ray protective glass
Elastic bonding and sealing in the electrical industry, in mechanical engineering, vehicle construction and shipbuilding
Not suitable for structural bonding of structural glazing elements.
Standards and tests:
- Test report on the suitability for contact with non-tempered acrylic glass (Rohm/Darmstadt)
- Tested and recommended by Schott Desag AG Deutsches Spezialglas, Grünenplan for the installation of X-ray protective glass RD 50 and RD 30
- UL 94 Flame Classification HB RTI 105 °C, file no. E176319
pre-treatment:
The adhesive surfaces must be cleaned and any contaminants such as release agents, preservatives, grease, oil, dust, water, old adhesives / sealants and other substances affecting adhesion must be removed. Cleaning non-porous surfaces: Clean with OTTO Cleaner T (airing time approx. 1 minute) and a clean, lint-free cloth. Cleaning of porous substrates: Remove loose particles from surfaces mechanically, e.g. with a steel brush or a grinding wheel. The adhesive surfaces must be clean, free of grease, dry and stable.
Processing:
Processing temperature: +5ºC to +35ºC.
Application method: Spray with a hand gun, compressed air gun or battery gun.
Cleaning: With turpentine substitute before hardening, then with silicone remover or mechanically removable.
Smooth: With smoothing agent and peel-off spatula before skin formation.
Storage:
Can be stored cool and dry for at least 12 months.
Delivery form:
310 ml cartridge (20 boxes per box)
Color:
white, grey, black, transparent