Ottoseal S51 PVC Silicone

OTTO Chemie
OTTO Chemie
OTTO Chemie

Ottoseal S51 ist auf die Abdichtung von Anschlussfugen bei Gummiböden, PVC Böden,Linoleumböden spezialiesiert. 36 Farben die perfekt auf Gummiböden, PVC Böden,Linoleumböden abgestimmt sind. Sehr abriebfest.

baseprice: 3,45EUR / 100 ml
incl. 19% VAT plus shipping costs (to DE)
required field
Scaled Prices
from 20 10,38EUR - you save 0,32EUR, baseprice: 3,35EUR / 100 ml
from 40 10,17EUR - you save 0,54EUR, baseprice: 3,28EUR / 100 ml
Delivery beginn within 1 - 3 daysDelivery beginn within 1 - 3 days **

Ottoseal S51 PVC Silicone

Product Info:

Ottoseal spezialiesiert S51 is on the sealing of joints with rubber flooring, PVC flooring, linoleum flooring. 36 colors are perfect for rubber flooring, PVC flooring, linoleum floors are matched. Very resistant to abrasion.

  • Silicone was developed especially for PVC, rubber and linoleum floors


  • Special colors


  • Flame retardant to DIN4102 - B1


  • For insulation of PVC, rubber and linoleum floors, fungal growth
  • Complies with flame B1. 
  • The contact surfaces must be dry, grease and dust. 
  • Prior to the formation of smooth skin with leveling agents. 
  • Avoid contact with eyes. In case of contact with eyes, rinse thoroughly with water if necessary doctor. 
  • Use only in well ventilated areas. Keep away from children.

 Standards and tests:

  • Tested and monitored according to DIN 4102-B1 - Flame - by Wood Research TU München
  • For OTTOSEAL S51 is a general test certificate (ABP) in front with the number P-HFM B6103


Application temperature: +5 º C to +35 º C.
Mounting method ejaculate: With Hand Press pistol, air gun or gun battery.
Cleaning: with white spirit before curing, then with silicone or removed mechanically.
Smoothing and leveling agents with Abziehspachtel before skinning.


The use of grouting linoleum floor coverings little leveling agents and leveling agents remove excess before it dries out from the base to prevent staining. The curing time is extended with increasing thickness of the silicone. One-component silicone adhesive bonds are not suitable for flat, unless the specific design requirements for this are given. If the silicon in layer thicknesses of more than 15 mm are used, please contact prior to the application of petrol chemistry. Before using the adhesive / sealant, the user must ensure that the materials in the contact area (solid, liquid and gas) with the adhesive / sealant are compatible and that do not damage or change (eg color). For building materials that are processed in the sequence in the area of the adhesive / sealant, the user has to clarify in advance that their ingredients or fumes did not affect or change (eg, discoloration) of the adhesive sealant can result. Where appropriate, the user contact the respective manufacturer
to take the building materials.

Application Note:

OTTOSEAL S51 is ready to use and can be used immediately after appropriate opening of this container. During application and curing of OTTOSEAL S51 is a well ventilated. After the complete curing OTTOSEAL S51 odorless and physiologically harmless. Aminvernetzende sealants can cause yellowing of some alkyd resin and various plastics, etc., so preliminary tests are always advisable. Because of the large number of possible influences during processing and the application is the user always make a sample processing and application. The concrete Aufbrauchsdatum is printed on the packaging printing and observed.


Cool and dry for at least 12 months.


310 ml cartridge (20 KTU. Per carton)


clear, white, flashgrau, distelgrau, agate, titanium gray, stone gray, anthracite, sandsteingrau, Sahara, cream, beige bahama beige, pastel yellow, pine, cocktail, clay, saffron yellow, melon curry, oranggina, tomato, brown-red, oxide red, pale brown, violet-blue, pastel blue, powder blue, brilliant blue, deep sea blue, aqua, green, blue, light green patina, karibischgrün, petrol, black

>> Technical Data >> Safety data sheet >> Certificate DIN4102-B1

Be the first to review this product.