Sika Reemat

Sika Chemie
Sika Chemie
Sika Chemie

PRIMER 150 verbessert die Haftung von Dichtstoffen aus Silikon, MS Polymer und SMX Technologie auf porösen Untergründen. Speziell bei erhöhter Wasserbelastung der Fugen ist die Verwendung zu empfehlen.

baseprice: 6,68EUR / pro qm
incl. 19% VAT plus shipping costs (to DE)
Delivery beginn within 1 - 3 daysDelivery beginn within 1 - 3 days **

Sika Reemat

Product Info:

PRIMER 150 improves the adhesion of silicone sealants, MS Polymer Technology and SMX on porous surfaces. Especially with increased water stress at the joint use is recommended.


  • All porous surfaces
  • Joint edges of expansion joints 
  • Joint edges of porous substrates with increased water stress


Method: brush
Application temperature: +5 ° C to +25 ° C.
The joint edges must be free of grease, clean, dry and free of dust before the primers. Then the joints are carefully primed with a brush. PRIMER 100 must be completely dry. Depending on the weather that is complete after about 60 minutes. Possibly a direct, second primers is necessary to achieve a full surface wetting of the joint faces. The Premier line is up to the introduction of the sealant (not earlier than after 60 minutes, at the latest after 240 minutes) against
Humidity and pollution re-protect.
Cleaning: Clean immediately with SURFACE CLEANER or white spirit after use.


12 months from date of manufacture in unopened packaging in a cool (+5 ° C and +25 º C) and dry storage. Opened container tightly closed and short-term use.


250 ml can (12 per box)
1000 ml can (6 per carton)



>> Technical Data

Be the first to review this product.