Product Info Soudal Fix All:
FIX ALL is a high quality, strong adhesive, permanently elastic adhesive / sealant based on hybrid polymer with a universal range of applications. Soudal Fix All Classic is a power adhesive for many applications.
Very easy to process
After curing permanently elastic
Waterproof and seawater resistant
Compensates for unevenness and material tensions
No staining on porous substrates such as e.g. Natural stone, ashlar, marble, granite, etc.
Bubble-free curing even at high temperatures
Very good, mostly primerless adhesion on almost all surfaces
Also sticks on damp surfaces
Silicone-, solvent-, halogen-, acid- and isocyanate-free
Very well paint-compatible according to DIN 52452-A1 (see remark), can be over-painted wet-on-wet
Colorfast, weather and UV resistant
Suitable for sanitary applications
Applications Soudal Fix All:
Tension-free structural bonding between metals, plastics (except PE, PP, PTFE and silicones) and hardwoods.
Sealing and bonding applications in the construction industry
Structural bonding of vibrating constructions
Sealing and gluing in metal structures
Stress-free bonding / sealing in wagon, container, ship, body, vehicle, caravan and apparatus construction
Seals in air conditioning and ventilation
Sealing of floor joints
FIX ALL has excellent, mostly primerless, adhesion to a variety of substrates, e.g. Metals (steel, AIMgSi1, brass, zinc, steel ST 1403, electro galvanized and fire galvanized steel, AICuMg1), plastics (polystyrene, polycarbonate, PVC, polyamide and GRP - not on ABS, PE, PMMA, PP, PTFE and silicones), polystyrene , Cork, enamel, concrete, glass, HPL and wood.
Attention: PMMA and polycarbonate may only be glued without tension, otherwise they may cause stress cracks. For polycarbonate, we generally recommend preliminary tests. As a general rule, it is important for plastics that the release agents used for manufacturing or protective films used for transport must be removed without residue prior to bonding, as these will in some cases considerably impair adhesion. Especially with porous natural stones, such as Sandstone, Carrara, Jura etc. may cause staining and / or adhesion problems. Plastics containing plasticizers (eg soft PVC, butyl rubber, EPDM and APTK) can cause incompatibilities such as discoloration or loss of adhesion. Here a suitability in the system is to be examined. The adhesive surfaces must be stable, clean, free of dust and grease. Dry substrates are particularly suitable. FIX ALL also sticks to damp surfaces and even under water. However, the adhesion achieved can be lower than that on dry and cleaned substrates.
Pretreatment: pretreat porous substrates with higher water load, if necessary with PRIMER 150. For all smooth surfaces we recommend pre-cleaning, degreasing and activating with SURFACE ACTIVATOR.
It is advisable to perform an adhesion and compatibility test on every surface first.
Attachment method: manual gun, air pressure gun or battery gun.
+ 0 ° C (frost-free) to + 40 ° C (ambient temperature)
+ 0ºC (frost-free) to + 35ºC (adhesive surface temperature)
The curing is done by humidity at room temperature from outside to inside and slows down over time. At low temperatures and / or low humidity, curing is significantly delayed!
Cleaning: with SURFACE CLEANER, SWIPEX or turpentine substitute before curing, then with SILICONE REMOVER or mechanically removable.
Smoothing: with SMOOTH or skin formation
Repair possibility: with FIX ALL
FIX ALL is paint-compatible. According to the relevant standards (for example, DIN 18540), elastic sealants should not be overcoated over the entire surface, since tensions and movements may cause crack formation in the non-elastic coating. Alkyd resin paints may have a drying delay of the paint. Due to the large number of paint systems available on the market, we recommend suitable compatibility and adhesion tests in advance. Any remaining soap residue from the smoothing water must be removed before painting, as this will reduce the paint adhesion.
12 months from date of production in unopened packaging in a cool (+ 5ºC to + 25ºC) and dry storage. Close off the drums and consume them at short notice.
290 ml PE cartridge (12 per carton)
gray, black, white