Tok Fill PA cold asphalt permeable to water

model
10071057
manufacturer
Denso
Denso

TOK Fill PA is a reactive high-performance mix for damage in open-pored asphalt surfaces. The material consists of noble split, grain crushed crushed sands and special bitumen. After application, the material cures very quickly. It is extremely stable and easy to work with.


49,79EUR
baseprice: 1,99EUR / pro kg
incl. 19% VAT plus shipping costs (to DE) and 47,60EUR Mindermengenzuschlag
Delivery beginn within 5-14 daysDelivery beginn within 5-14 days **


Tok Fill PA cold asphalt permeable to water

Product info Tok Fill repair asphalt:

TOK Fill PA is a reactive high-performance mix for damage in open-pored asphalt surfaces. The material consists of noble split, grain crushed crushed sands and special bitumen. After application, the material cures very quickly. It is extremely stable and easy to work with.

Application areas:

TOK Fill PA can be used wherever repairs in porous asphalt surfaces (so-called "drain" or "whisper" asphalt) are required. It is particularly suitable for use on sharp-edged eruptions and in the area of impact and core holes. TOK Fill PA can be installed in different layer thicknesses and resists the usual traffic load on motorways. The material can also be used on damaged areas in the area of roadway installations and transitional structures.

Processing guidelines Tok Fill:

Underground TOK Fill PA can be installed almost anytime. The areas to be treated should be carefully freed from loose components and dirt. The pad can be slightly damp. For better adhesion, the contact surfaces can be pretreated with a pressure-sensitive adhesive.

Processing conditions Weather-independent processing is easily possible between - 10 ° C and + 30 ° C (+14 ° F and + 86 ° F).

Installation instructions The loose material can be poured very well out of the bucket into the place of installation. For optimum processibility at low temperatures, the material should be stored at room temperature beforehand. Additional heating of the loose mix should be avoided at all costs and does not make sense. The material is slightly inflated and distributed without compacting the mix. Then moisten with water well.
The moisture is needed to accelerate the curing reaction. Subsequently, the material submitted is compacted with a rammer, a light roller or a vibrating plate. The surface can be fully re-used almost immediately after installation approx. 2-4 hours after installation.
At temperatures around the freezing point, longer curing times can be expected. Up to about 4 cm, the mix i.d.R. be installed in one layer, due to the better compaction and associated higher stability should be installed at greater installation thicknesses in at least two layers.
The minimum layer thickness is 25 mm.
On vertical cutting edges we recommend, before installing the TOK Fill PA, the joint connection flank, e.g. to train with our TOK Band SK Drain.

Material properties:

Grain size in mm: 0/8, installation thickness of 2 - 5 cm per layer
Application temperature: from -10 ° C to +25 ° C, even on damp surfaces
Density: approx. 2.1 g / cm3 (in compressed state)
Consumption: approx. 80 kg / m2, compacted condition with 4 cm installation thickness
Color: Black

Storage:

TOK Fill PA can be stored in its original sealed packaging for at least 9 months from the date of manufacture.
With opened - but reclosed - containers, the storage time can be reduced slightly.
The finished mix is not sensitive to frost.
The ideal storage temperature is around +15 ° C (+59 ° F) dry.
The buckets must not be exposed to direct sunlight.

Packaging:

25 Kg bucket (resealable) / 24 buckets per pallet

Be the first to review this product.

We Also Recommend

Densolastic EM
169,95EUR / can
baseprice: 23,28EUR / pro kg
incl. 19% VAT plus shipping costs (to DE) and 47,60EUR Mindermengenzuschlag
Delivery beginn within 2 - 10 daysDelivery beginn within 2 - 10 days **
(Min quantity: 3 can)