baseprice: 2,15EUR / kg
incl. 19% VAT plus shipping costs (to DE)

Reinau plaster grouting compound

Product Info Reinau paving stones grout:

  • Hot Sealing
  • high stability
  • Tested in accordance with the ZTV Fug-StB and the TL Fug-StB.

Application areas:

REINAU plaster potting compound for paving stones grout for joints between stone paving indoors and outdoors.

Processing paving stones have:

All work must be carried out in accordance with the current ZTV Fug-StB. The joint gap width should be approx. 8 mm to 20 mm, the joint gap depth must be 1.5 times the joint gap width, but at least 30 mm. The grouting work should be interrupted in case of rain and stagnant water. Before grouting, the joint must be cleaned with a steel brush or similar device (dust-free). Adhesive remnants of old potting compound must be completely removed during renovation work. Melting of the potting compound must take place in a double-walled melting vessel with stirrer, cover and indirect heating and temperature display. In this case, the heating must be slow, with the first filling should be about 1/3 of the total volume. Thereafter, further material can be added to the liquid mass. The melting temperature of up to 180 ° C (+356 ° F) must be maintained while stirring continuously. It is important to ensure that this temperature is not exceeded in any case, since otherwise it can lead to segregation or decomposition of the potting compound. As a result, the material may become unusable and the material properties may change. Refrigerated REINAU plaster casting compound may be melted a maximum of twice. If the processing of the mass on the same day is not possible, the boiler must be emptied.

The regulations that apply to the melting and processing of hot-liquid, bituminous substances must be observed. In particular, the fumes formed during melting should not be inhaled. Danger warnings and safety advice on the containers must be strictly observed. Further information can be found in the safety data sheets.


Store containers standing and dry and protect from direct sunlight.
Under these conditions REINAU Pflastergussmasse is almost completely durable.
The removal of residue-depleted (drip-free, trowel-clean, free from dripping) white or steel sheet containers takes place via KBS; emptied plastic and paper cardboard containers are disposed of by Interseroh.


Disposable sheet metal containers 38 kg per 16 containers per pallet
Cardboard siliconized 13 kg per carton; 48 cartons per pallet

Be the first to review this product.

We Also Recommend