Fix All Turbo

model
fialltu
manufacturer
Soudal
Soudal

FIX ALL Turbo is a permanently elastic construction adhesive based on SMX polymer with very fast bond strength.


13,46EUR / cartridge
baseprice: 4,34EUR / 100 ml
incl. 19% VAT plus shipping costs (to DE)
required field
Color: Please select
Delivery beginn within 2 - 10 daysDelivery beginn within 2 - 10 days **


Fix All Turbo

Product Info Soudal Fix All Turbo:

FIX ALL Turbo is a permanently elastic construction adhesive based on SMX polymer with very fast bond strength.

Very fast adhesion
High final strength
Very easy to process
After curing permanently elastic
Almost odorless
Very good, mostly primerless adhesion to almost all substrates, even on damp substrates - silicones, solvents, halogens, acids and isocyanates
Very well paint-compatible according to DIN 52452-A1 (see note) after skin formation
Colorfast, weather and UV resistant

Application areas:

Tension-free bonding between metals, plastics (except PE, PP, PTFE and silicones) and hardwoods.
Demanding adhesive applications in the construction and metal industries
permanently elastic construction bonds

Substrates:

FIX ALL TURBO has excellent, mostly primerless, adhesion to a variety of substrates, e.g. Metals (steel, AIMgSi1, brass, zinc, steel ST 1403, electro galvanized and fire galvanized steel, AICuMg1), plastics (polystyrene, polycarbonate, PVC, ABS, polyamide, PMMA and GRP - not on PE, PP, PTFE and silicones), polystyrene , Cork, enamel, concrete, glass, HPL and wood. Attention: PMMA and polycarbonate may only be glued without tension, otherwise they may cause stress cracks. For polycarbonate, we generally recommend preliminary tests. As a general rule, it is important for plastics that the release agents used for manufacturing or protective films used for transport must be removed without residue prior to bonding, as these will in some cases considerably impair adhesion. Plastics containing plasticizers (eg soft PVC, butyl rubber, EPDM and APTK) and bituminous substrates may cause incompatibilities such as discoloration or loss of adhesion. Here a suitability in the system is to be examined. The adhesive surfaces must be stable, clean, free of dust and grease. Dry substrates are particularly suitable. Here the best adhesive values ​​are achieved. FIX ALL TURBO also adheres to damp surfaces. However, the adhesion achieved can be lower than that on dry and cleaned substrates. Pretreatment: pretreat porous substrates with higher water load, if necessary with primer 150. For all smooth surfaces we recommend pre-cleaning, degreasing and activating with Surface Activator. It is advisable to perform an adhesion and compatibility test on every surface first.

Processing:

Attachment method: Apply hand gun, air pressure gun or battery gun on one side as a strand or in points (at least every 15 cm). For panel gluing, place the dots in the corner and edge area. Join together immediately and press firmly or e.g. tap with a rubber mallet. If necessary, support or pinch and fix. The adhesive bond is hand-tight after approx. 20 minutes and can be loaded after 3 hours.

Working temperature:
+ 0 ° C (frost-free) to + 40 ° C (ambient temperature)
+ 0ºC (frost-free) to + 35ºC (adhesive surface temperature)
The curing is done by humidity at room temperature from outside to inside and slows down over time. At low temperatures and / or low humidity, curing is significantly delayed!
Cleaning: with Surface Activator, Swipex or turpentine substitute before curing, then with silicone remover or mechanically removable.
Smoothing: with smoother or natural stone smoothing agent against skin formation
Repair possibility: with FIX ALLTurbo

Remarks:

FIX ALL TURBO is paint-compatible. Alkyd resin paints may have a drying delay of the paint. Due to the large number of paint systems available on the market, we recommend suitable compatibility and adhesion tests in advance. Any remaining soap residue from the smoothing water must be removed before painting, as this will reduce the paint adhesion. FIX ALL TURBO is not suitable for glass / frame sealing.

Storage:

12 months from date of production in unopened packaging in a cool (+ 5ºC to + 25ºC) and dry storage. Close off the drums and consume them at short notice.

Packaging:

290 ml PE cartridge (12 per carton)

Colour:

White

Be the first to review this product.

Customers who bought this product also purchased

-7%
Transpacryl
Special offer
3,69EUR / cartridge
Our old price 3,95EUR
baseprice: 3,69EUR / per pcs.
incl. 19% VAT plus shipping costs (to DE)
Delivery beginn within 2 - 10 daysDelivery beginn within 2 - 10 days **

We Also Recommend