Sikafloor 2530 W

model
SF2530W
manufacturer
Sika Chemie
Sika Chemie

Sikafloor 2530 W epoxy resin sealant for producing colored or transparent sealing of floor surfaces inside and outside made of concrete, cement screed and mastic asphalt (indoor areas only) as well as sealing of litter coverings. Sikafloor 2530 W epoxy resin sealant offers good chemical resistance, suitable for production and warehouse halls, parking garages and underground garages.


169,95EUR
baseprice: 28,33EUR / pro kg
incl. 19% VAT plus shipping costs (to DE)
required field
Color: Please select

Delivery beginn within 5-14 daysDelivery beginn within 5-14 days **


Sikafloor 2530 W

Product information Sikafloor 2530 W:

Sikafloor 2530 W epoxy resin sealant for producing colored or transparent sealing of floor surfaces inside and outside made of concrete, cement screed and mastic asphalt (indoor areas only) as well as sealing of litter coverings. Sikafloor 2530 W epoxy resin sealant offers good chemical resistance, suitable for production and warehouse halls, parking garages and underground garages.

Good chemical and mechanical resistance
Diffusible
Hardens quickly
Environmentally friendly
Slip resistance
Physiological harmlessness
Decontamination capability

Areas of application for epoxy resin sealing:

For producing colored or transparent seals on floor surfaces inside and outside made of concrete, cement screed and mastic asphalt (only indoors) as well as sealing litter coverings. Suitable for surfaces where there is light to medium mechanical stress, good chemical resistance is required and the typical concrete or screed surface structure
should be preserved. Typical areas of application are production and warehouse halls, parking garages and underground garages.

Processing instructions:

The substrate must have sufficient load-bearing capacity (compressive strength at least 25 N/mm2). The surface must be even, fine to the touch, firm, dry, free of grease and oil and free of loose and sandy parts. The tear strength must not be less than 1.5 N/mm2. The compatibility with old coatings must be checked. Dense surfaces made of hard materials as well as surfaces produced with post-treatment agents, plasticizers or other chemical additives can disrupt the adhesion of coating materials if the substrate is not properly prepared. Test areas must be created here. Insufficiently stable layers and contamination must be removed mechanically, e.g. by blasting or milling. Defects, holes or breakouts must be leveled out using Sika products. Clean primed or coated surfaces from contamination. Sweep away loose sand.

Stir component A mechanically before mixing. Before processing, carefully combine components A + B in the prescribed mixing ratio. To prevent splashes or even spilling of the liquid, mix the components with a continuously adjustable electric mixer and for a short time at low speed. Then increase the stirring speed to a maximum of 300 rpm for intensive mixing. The mixing time is at least 3 minutes and is only finished when a homogeneous mixture is present. Pour the mixed material into a clean container (repot) and mix briefly again as described above.

When using Sikafloor 2530 W as a primer, the material is applied intensively to the surface with a brush or brush in the first step to achieve even wetting. The further operations can be rolled with a roll. With uneven material distribution, variations in layer thickness and fluctuating environmental conditions, differences in color and gloss are unavoidable. Waiting times during processing can lead to low approaches. Ensure good ventilation during processing and hardening (especially at temperatures < + 15°C). Otherwise, reaction disorders cannot be ruled out.

Substrate temperature + 10°C + 20°C + 30°C
Walkable 2 days 15 hours 10 hours
easily resilient 5 days 3 days 2 days
fully resilient 10 days 7 days 5 days

Coating structure / material consumption:

Surface stress is normal, stress is heavier
Normally absorbent

1 x Sikafloor 2530W

+ 5% added water

1 - 2 x Sikafloor 2530 W

 

1 x Sikafloor-156

2 x Sikafloor-2530W


Non-sucking

1 x Sikafloor 2420

1 - 2 x Sikafloor 2530 W

 

1 x Sikafloor-2420

2 x Sikafloor-2530W


Strongly absorbent

1 x Sikafloor 156

1 - 2 x Sikafloor 2530 W

 

1 x Sikafloor-156

2 x Sikafloor-2530W

Sikafloor-2530W: On concrete and screed surfaces:
(colored) 0.2 - 0.3 kg/m2 per operation. On unprimed surfaces, approx. 5% by weight of water is added for the first step.
On bedding floors:
approx. 0.4 - 0.6 kg/m2. Consumption varies depending on the size of the grit.
Sikafloor-156: 0.3 - 0.4 kg/m2
Sikafloor-2420: 0.1 - 0.2 kg/m2
Sikafloor-2530W: On concrete and screed surfaces:
(colorless) 0.2 - 0.3 kg/m2 per operation. On unprimed surfaces, approx. 5% by weight of water is added for the first step.

Storage:

Unopened containers have a shelf life of at least 18 years when stored in a cool, dry place.

Delivery form:

Tinplate bucket of 6 kg (A+B)

Tinplate bucket of 18 kg (A+B)

Colors:

Almost all colors possible.
Colorless (yellowish transparent) as “Sikafloor-2530 W colorless”. Slight color variations are unavoidable due to raw material-related reasons. For light colors, such as yellow or orange, multiple coats are necessary to achieve opacity. Own ver

Be the first to review this product.

Customers who bought this product also purchased

We Also Recommend