PERIMETERKLEBER ist ein PU Schaum Polyurethanklebstoff für die Verklebung von Polystyrol Hartschaumplatten als Perimeterdämmung sowie Dämmplatten und Drähnelementen. PERIMETERKLEBER ist lösemittelfrei und zeichnet sich durch eine gute Haftung zwischen Perimeterdämmplatten und Kellerwandoberflächen wie Beton, beschichteten Bitumenbahnen und Bitumendickbeschichtungen aus. Die sehr hohe Ergiebigkeit von ca. 14 m2; Kellerwandfläche pro 750ml Dose und die gute Anfangshaftung vereinfachen die Montage von Perimeterdämmung deutlich!


13,12EUR
baseprice: 1,75EUR / 100 ml
incl. 19% VAT plus shipping costs (to DE)
required field


Perimeter Kleber

Product info:

PERIMETER GLUE is a ready-to-use, self-polyurethane adhesive for bonding the rational use of polystyrene foam slabs as insulation and perimeter insulation and Drähnelementen. PERIMETER GLUE is solvent-free and is characterized by good adhesion between the perimeter and insulating the basement wall surfaces such as concrete, bitumen and coated thick coatings of bitumen. The high yield of about 14 m2; basement wall surface per 750ml can and the good beginning of liability simplify the installation of perimeter insulation much!

Applications:

     * Bonding of polystyrene foam insulation boards as a perimeter according to DIN 4108-2. (Not suitable for drückendem water!)
     * Bonding Dämm-/Drähnelementen

Processing:

Can fixed to unscrew the screw gun and pistol can with the bottom about 30 x shake vigorously so that the canned contents are well mixed and the adhesive quality is optimized. By adjusting the strand of the glue gun set.

The pistol in the application as vertically and by pressing the clicker PERIMETER KLEBER from bottom to top, with a streak of Strangford distance of about 25 cm (Min. three strands per end, or at least two boards short strands!) On the insulating panel or the basement wall spray. The Pistolendüse is not on the insulating panel to the basement wall established. Between Pistolendüse and insulating panel / basement wall during the spraying is a distance of 1-2 cm observed. Shortly thereafter wait and within 8 minutes of the insulating panel to vigorously press the basement wall. In order to avoid a fall, we recommend that the insulation panels easy to fix. All open joints in the insulation with PERIMETER KLEBER fill. About person, fully hardened glue off with a knife.

Processing temperature: 5 degrees C to 35 degrees C (adhesive surface temperature)
  15 ° C to 25 ° C (canned temperature) If necessary tin in the cool or warm water slowly to the optimum temperature.
Cleaning: with pistols and foam cleansers before curing, then only mechanically removable.

Storage:

12 months from the date of production in unopened packaging in cooler (5 degrees C to 25 º C) and dry storage. The cans must be stored below the bonding of Sprühventiles ruled out. Dawn cans well sealed and consume the short term.

Delivery:

750ml Aerosolsprühdose (12 cans per case)

Color:

yellow

>> Technical Data

Be the first to review this product.

Customers who bought this product also purchased

We Also Recommend