Dehnzonenmanschette

Secure connection with OTTOFLEX liquid film / sealing slurry / sealing membrane / sealing and decoupling membrane
Ideal for all common pipe penetrations
Simple and quick processing
Extremely elastic and tear-resistant
Resistant to ageing

Areas of application for the Flex sealing sleeve:

Special elastomer sleeve (available in 3 sizes) with expansion zone and sealing lip for permanently watertight sealing of pipe penetrations under tiles, slabs and ceramic coverings. Composite sealing in damp and wet rooms under ceramic coverings and natural stone

Application instructions:

The substrate is prepared with OTTOFLEX primer and a single application of OTTOFLEX liquid film/OTTOFLEX sealing slurry. The respective sleeve is placed over the pipe bushing, inserted into the still fresh OTTOFLEX liquid film/OTTOFLEX sealing slurry and pressed down. During the second coating, the entire cuff is also coated. Glue the OTTOFLEX sleeves over the entire surface of the OTTOFLEX sealing membrane / sealing and decoupling membrane with OTTOCOLL M 500 or M 595 and smooth the transitions with the material that comes out. Because of the large number of possible influences during processing and application, the processor must always carry out a trial processing and application.

Standards and tests:

Corresponds to the water impact classes W0-I, W1-I, W2-I and W3-I for crack class R1-I according to DIN 18534
Corresponds to water impact class W1-B for crack classes R0-B and R1-B for container locations S1-B and S2-B according to DIN 18535
Corresponds to the moisture resistance classes according to ZDB and abP
Corresponds to stress classes W1, W2, W3, W4, W5 and W6 according to ÖNORM B 3407
French VOC emission class A+
EMICODE® EC 1 Plus - very low emissions