Ottocoll M590

OTTO Chemie
OTTO Chemie
OTTO Chemie

Ottocoll M590 Klebstoff für flächige Klebungen zum spannungsausgleichenden Kleben und Montieren unterschiedlichster Materialien. Ottocoll M590 Klebstoff für flächige Klebungen ist fließfähig und hat eine sehr gute primerlose Haftung auf zahlreichen Untergründen — auch bei Wasserbelastung.

baseprice: 1,74EUR / 100 ml
incl. 19% VAT plus shipping costs (to DE)
required field
Delivery beginn within 24hrsDelivery beginn within 24hrs **

Ottocoll M590

Product Info:

Ottoseal M360 for sealing joints in facades, metal constructions, terraces and balconies, strain, and joints of precast concrete and aerated concrete
Ottoseal M360 is glued to OTTO-Bauanschlussbändern BAB / BAB and I / O on masonry, concrete, aerated concrete etc. suitable.

  • 1K sealant based on hybrid polymer STPU
  • Paintable to DIN 52 452 
  • Good weathering and aging resistance 
  • Cures of bubbles from 
  • Low odor 
  • Free of isocyanates andSilicone


  • Exterior wall joints to DIN 18540-F


  • Sealing joints in facades, metal constructions, terraces and balconies


  • Expansion and connection joints in precast concrete and aerated concrete


  • Bonding of OTTO Bauanschlussbändern BAB / I and BAB / A on masonry, concrete, aerated concrete etc.

 Standards and tests:

  • Meets the requirements of ISO 11600 F 25 LM


  • For applications according to IVD-Leaflet suitable 7 +9


Before using the adhesive / sealant, the user must ensure that the materials in contact area (solid, liquid and gas) with the adhesive / sealant are compatible and not harm them or change (eg color). For building materials that are processed in the sequence in the area of the adhesive / sealant, the user has to clarify in advance that their ingredients or fumes did not affect or change (eg, discoloration) of adhesive, sealant may cause. If necessary, the user has to take consultation with the respective manufacturer of building materials. Not suitable for Glasfalzversiegelung for floor joints, for the sanitary and Dauernassbereich, chemicals and strain on all of our recommendations-lying areas. Contact and contact with bituminous materials such as weichmacherabgebenden Butyl, EPDM, neoprene, insulated, and black paints avoid. Paints, coatings, plastics and other coating Mater Alien must be compatible with the sealant. Not suitable for sealing / bonding of copper under UV-/Temperatureinwirkung. When UV-exposed bonding / sealing of glass, we recommend the use of high-quality silicone adhesives / sealants like OTTOSEAL S110 OTTOSEAL S120 (for Glasfalzabdichtungen) OTTOSEAL S 10 (including those for bonding), OTTOSEAL S 7 (for weather seals) or OTTOCOLL S 81 ( glued to the window).When UV-exposed bonding / sealing of transparent acrylic plastics such as silicone sealant, we recommend our S 72nd OTTOSEAL
The shades can be affected by environmental conditions (high temperature, chemicals, fumes, UV radiation). This has no effect on the product features. According to the relevant standards should not be painted elastic joint sealants in principle the entire surface, since tensions and cracks in the movement, in contrast to
elastic sealant paints can not occur.


Preparation of Surfaces Compatibility: Paints, varnishes, plastics and other coatings Mater alien shall be compatible with the adhesive / sealant.

Cleaning: Surfaces must be cleaned and any contaminants, such as release agents, preservatives, grease, oil, dust, water, old adhesives / sealants, and other liability interfering substances are removed.


cleaner for non-poröse.Die cleaning should Cleaner with OTTO T, or other cleaners to acetone or isopropanol and with a clean, lint-free cloth erfolgen.Reiniger for porous surfaces: Porous surfaces must be mechanically, eg with a steel brush or a grinding wheel to be cleaned of loose particles.

Application Note:

Because of the large number of possible influences during processing and use by the processor is always pre-trial processing and application. The concrete Aufbrauchdatum is printed on the packaging printing and observed. We recommend the adhesives / sealants in the original unopened - containers dry (If the products over long periods (several weeks) at high temperature / humidity is stored and / or transported, a decrease in the durability or a change in material properties are not excluded.


Application temperature: +5 º C to +35 º C.
Mounting method ejaculate: With Hand Press pistol, air gun or gun battery.
Cleaning: with white spirit before curing, then with silicone or removed mechanically.
Smoothing and leveling agents with Abziehspachtel before skinning.


Cool and dry for at least 9 months shelf life.


580ml aluminum foil bags (20 bags per carton)


white, gray, black

>> Technical Data >> Safety data sheet

Be the first to review this product.