Ottoseal Silout

model
STEX-20-C1378
manufacturer
OTTO Chemie
OTTO Chemie

For degreasing marble and natural stone where greasy edges have occurred due to unsuitable silicone sealants and adhesives. With the successful use of natural stone degreasing, a complex and expensive renovation of natural stone coverings can be avoided


17,68EUR / cartridge
baseprice: 5,70EUR / 100 ml
incl. 19% VAT plus shipping costs (to DE)
Delivery beginn within 2 - 10 daysDelivery beginn within 2 - 10 days **


Ottoseal Silout

Product info:

For degreasing marble and natural stone where greasy edges have occurred due to unsuitable silicone sealants and adhesives. With the successful use of natural stone degreasing, a complex and expensive renovation of natural stone coverings can be avoided

application areas

Ready-to-use paste
Easy workability
If used successfully, a complex and expensive renovation of natural stone coverings can be avoided.

Special instructions:

Each natural stone is unique in its composition. For this reason, it cannot be ruled out that greasing of natural stone can increase even if the degreasing paste is used properly. Although this effect only occurs extremely rarely, it is mentioned here purely for precautionary reasons. Due to the large number of different types of natural stone, a preliminary test on a concealed area is recommended. For these reasons, no guarantee can be given. Do not use OTTOSEAL StainEx at substrate temperatures below +5 °C and above +20 °C

Application Notes:

OTTOSEAL StainEx can remove grease on the edges of natural stone caused by unsuitable sealants and dissolves dirt up to a depth of 2 cm. A preliminary test should be used to convince yourself that the fatty deposits can be removed with OTTOSEAL StainEx. This paste is only effective for greasy deposits, dirt on natural stones caused by primer, washing-up liquid, etc. are not removed. The sealant must be completely removed from the joint. When using the paste, the joint flanks should be dry. Apply OTTOSEAL StainEx to the surface to be cleaned and work in with a brush. Then apply OTTOSEAL StainEx again to achieve an application thickness of at least 5mm. After the paste has dried (at least 12 hours, the paste must be completely pulverized), brush off the remaining solid with a broom or vacuum it out. After cleaning, no dark spots should be visible. Remove deep-seated dirt with a second or third application. Then clean the joints and re-point with the natural stone silicone OTTOSEAL S 70. Due to the large number of possible influences during processing and application, the processor must always carry out a test processing and application. The specific use-by date can be found on the label on the container and must be observed.

Processing:

Application method: with brush
Processing temperature: +5°C to +20°C.

Consumption: 1 cartridge for approx. 500 cm² with a layer thickness of 5 mm

Storage:

12 months from production date in unopened packaging in cool (+5ºC and +20ºC) and dry storage. Close the opened container well and use it up quickly.

Delivery form:

310ml cartridge

Colour:

beige

Be the first to review this product.

Customers who bought this product also purchased

We Also Recommend