Concrete seal joints
Joints are a household name for any home improvement or homeowner. They occur in many areas of the house. The most common places are where two different components are connected or two different materials meet. The joints fulfill different tasks.
Different types of joints
The connecting joint:
The connecting joint is the best known joint in the entire house. It connects different components and materials together. Different requirements are placed on the joint. A connection joint must have a good sealing function. In addition, the connection should be partially elastic and temperature resistant.
A good example is the transition of a tiled floor to the house wall. Here, the connection joint must have the listed properties, with the sealing function in the foreground. If you transfer the example to a balcony, the connection joint has to prove its elasticity over a larger temperature range. The requirements change only minimally, but can have a big impact. If the joint can not provide the appropriate elasticity over the temperature range, it will rupture and moisture may thereby penetrate.
The movement joint:
The so-called joints for receiving movements, so called movement joints, basically have the task of protecting interconnected components from overvoltage and thus from damage. The name of the joint depends on its application and its nature. This is how different names come about.
The following list contains the most common names for joints that are used to absorb motion:
expansion joints
contraction joints
settlement joints
Dummy joints and press joints
construction joints
These names usually stand for a movement joint.
The sealants that are suitable for concrete joints:
Joints in concrete construction
In the construction industry and concrete construction, joints are essential. Even when building precast concrete parts, joints are required to connect the individual components together. Here one speaks mostly of a Arbeitsfuge. Even if the name of the joint does not suggest any particular property, the joint must have this property accordingly. These in turn result from the properties of the concrete from which the components are made.
In the cellar construction, where concrete prefabricated parts are often used, the joint must adequately seal off moisture. Moisture coming from the outside, for example due to heavy precipitation, must not penetrate and thus cause possible damage. The joint must also be able to withstand the low temperatures in winter and have a certain elasticity. Transitions between the concrete parts and the ceiling must be able to move a bit. Otherwise, cracks may occur in the joint, resulting in insufficient protection against moisture. From the properties it can be seen that the simple construction joint in this area actually serves as a mixture of sealing joint and expansion joint.
You can find the classic expansion joint just as often in concrete construction. It is used for components with large surfaces. For example, in concrete floors or bridge parts. The expansion joint can also perform a sealing function, but it serves primarily to protect the components themselves from stress cracks. In doing so, it catches the movement of the parts which expand or contract when the temperature changes, thus increasing the service life.
If the expansion joint does not succeed in absorbing the movements, stress cracks will be created on the components. That can have different reasons. The gap may have been miscalculated or the requirements were simply underestimated. The resulting damage to the affected components can lead to replacement of the parts or be sealed with another joint. Such a process is called crack compression. Whether a crack compression comes into question, always depends on the degree of damage and the static of the component. Crack crimps can be made either tight or non-positive.
Fazit
Even if all important regulations for the repair and sealing of joints are to be found in ATV DIN 18349 and in DIN 18540, you should refrain from self-tests with concrete putty or similar measures, which are not flexible and will not last forever.
For sealing joints in concrete construction, the right materials and the right tools are required. For a permanently effective seal you should use high quality sealants.