Remove adhesive residue
The good old glue. To connect two materials just perfect, but the removal of adhesive residue is unfortunately not so easy. In addition, glue is not just glue and the market provides a variety of types of glue for the different materials. As different as the adhesives are, so different are the approaches to remove adhesive residue.
We can reassure you. Usually you will be successful with either heat, grease, lye or an alcoholic solvent.
It is also important to distinguish in which phase the adhesive is. If he has not dried yet, not much help, because then usually a simple cloth is enough to wipe. However, if the glue has already dried or hardened completely, sometimes you also need heavy guns.
However, so that the removal of the adhesive residue does not end in utter despair, we have prepared a few tips to help you remove the adhesive residue.
10 tips to remove adhesive residue
- 1. Warm water: Just try it classic with warm or hot water. The heat dissolves the glue residue. Works e.g. good with stickers on plastic.
- 2. Paint thinner: Apply the paint thinner to the surface with the help of a cloth. Then wait about 10 minutes and then try with a scraper (Ceranfeldschaber) to master the matter. Put on gloves better here.
- 3. Benzine: Proceed analogously to the method with paint thinner. Particularly suitable for surfaces made of plastic.
- 4. Creep Oil Spray: Spray the adhesive residue and let the oil work for a short time. Then rub properly.
- 5. Nail polish remover: Here acetone is the important ingredient. Also leave to act for a short time and rub again properly.
- 6. Edible oil: olive, sunflower or baby oil can work here. It is best to work in with a cloth.
- 7. Glue remover: The pro among the tips. As different as the glue, but so are the removers. Always observe the manufacturer's instructions.
- 8. Baking soda and water: Not only suitable for cakes, but also for removing glue residues. Mix together a paste and apply it to the adhesive. Let it work for a short while and then the post office.
- 9. Eraser: Just rub whatever you need without any further aids.
- 10. Hairdryer and Tweezers: Heat is the enemy of glue residue. Try a hair dryer and work directly with the tweezers.
Note: You can of course also combine the proposals if necessary to remove the glue residue. Depending on which adhesive it is with the leftovers, one or the other tip can not work at all. It should be mentioned at this point only. It should also be taken into account that the method used should always be tried out in an invisible location to avoid damage that may subsequently be visible.
Also very important in the removal of adhesive residues are the different surfaces on which the remains are! For plastic and glass you usually have it very easy and the tips mentioned show their effect without damage. For wood, on the other hand, you have to be a little more careful about the distance.
Remove adhesive residue on wooden surfaces
When removing adhesives on wood, a distinction must be made between painted and unpainted surfaces. If the surface is painted, the paint can be damaged very quickly. On the other hand, you can simply sandpaper unpainted surfaces with emery paper to remove the glue residue.
Initially use only the heat method on a varnished wooden surface. As already mentioned, you can use a hair dryer and work with tweezers. However, do not keep the hair dryer too close to the paint. You should keep a distance of 20cm. If the heat method has no effect, you have to drive harder guns. However, these are often associated with damage to the paint.
I wish you success!