sealing slurries

Sealing mud - you should know that!Dichtschlämme mit Spachtel auftragen

Moisture and moisture always pose a risk to buildings and can be a problem, at least if not properly sealed. Especially on the earth-contacting wall areas (perimeter), such as the outer walls of the cellar, soil moisture, leachate, congestion, groundwater and in the worst case, floods can penetrate into the cellar. However, sealing slurries are the solution with which you can reliably protect your basement, walls and floors from too much intrusive water.

What sealing slurries are, what task they fulfill exactly, what they consist of and above all how they are used, will be clarified in the following article.

Sealing mud - What is it?

Sealing slurries are also called waterproofing muds, waterproofing muds or waterproofing muds, and as you suspect, they make something dense or dense.

The comparatively liquid mixture consists of various cements, as well as minerals and additives of plastic. The cement ensures that the layer remains permeable after application and the plastic provides flexibility. This is also the secret of Dichtschlämmen. The composition makes sealing slurries hydraulically setting. Although they are even mixed with water, but then water repellent and also impermeable to water vapor. Furthermore, sealing muds are weather-resistant. The processing can be done after mixing with a brush, spatula or with a special syringe and is usually very comfortable, since the mass also adheres very well.

Applications of sealing slurries

Sealing sludge is not only used in new construction projects, but also in refurbishment cases, so that it is properly sealed afterwards. The possibilities are very diverse and vary from project to project.

Possibilities are for example the following:

  • The so-called perimeter seal, as already mentioned at the beginning.
  • Horizontal barrier against rising damp.
  • During the construction phase to waterproof against moisture or moisture.
  • Splash protection in the base area.
  • Seal the splash zone in the bathroom around the bathtub or shower.
  • Before laying tiles on balcony or terrace to seal.

You realize, sealing muds are versatile and always the goal is to defeat the enemy moisture. When using, however, it should be noted that sealing slurries may vary from manufacturer to manufacturer and some products are only produced for special applications.

lll➤ To the sealing slurries

It should also be noted that not every substrate is suitable for the application. However, you can remember that sealing slurries can be applied very well on the following substrates:

  • concrete
  • gypsum plaster
  • tiling
  • Lime-cement plaster
  • wall rock
  • natural stone
  • aerated concrete
  • cement plaster
  • cement screed

How to properly apply sealing sludge

Basically, you apply the mass layer by layer and you should aim for a total of two layers. Each layer has an application thickness that is in the millimeter range. But you should not exceed 5 millimeters, because here it does not apply that a lot also helps a lot. They also only start with the second layer when the first layer has dried.

Step by step to the perfect result:

  • Preparation of the underground: The preparation is, as always, everything! You must remove old paint and plaster layers. If damage is found in the masonry during preparation, you must first repair it. Access repair mortar here, if necessary. Then make sure you have a clean work surface. Wire brushes, brooms or more professional equipment, such as a sandblaster offer here.
  • Mixing: You will receive ready-mixed slurry in powder form. When mixing with water, pay attention to the correct mixing ratio of the manufacturer. In any case, stir until you have a smooth mass.
  • Applying: Let's come to apply the sealing slurry. If you have a very dry and very absorbent surface in front of you, moisten it first. Then start with the first shift. As already mentioned, you should have a maximum of 5 millimeters as the order thickness in mind. Once the first coat has been applied, it must first harden. To optimally cure sealing slurries should be kept moist for about 1 1/2 days and protected from sunlight, rain and frost for 3 days. Only then is the second layer applied, and analogously as described above.

Apply the two variants to the sealing slurry:

Dichtungsschlämme auftragen mit Spachtel Apply sealing slurries with a toothed spatula

Dichtschlämme auftragen mit Roller Apply sealing sludge with paint roller. (Is usually for priming on absorbent surfaces)

 

Apply video to the sealing slurry:

If you have questions, do not hesitate to contact us. We will be happy to advise you.