Product information Ottoseal S 67 clean room silicone:
Ottoseal S 67 clean room silicone elastic joints in clean rooms and production areas with high hygiene requirements. Sealing of joints in cold stores, hospitals, food processing companies.
- Excellent metal adhesion No pre-treatment on many metals
- Low odor Pleasant processing
- Non-corrosive Does not cause (rust) corrosion on unprotected metal surfaces
- Good chemical resistance (e.g. to cleaning agents and disinfectants) Can be used in areas subject to severe chemical stress
- Fungicide equipped resistance to mold and bacteria
- Very good weather, aging and UV resistance For long-lasting indoor and outdoor applications
Standards and tests:
- Tested for applications in the clean room area and according to DIN EN ISO 846 by ISEGA Research and Investigation Company mbH Aschaffenburg
- Suitable for use in HVAC systems in accordance with VDI 6022, sheet 1
- Suitable for applications according to IVD data sheet no. 31+35
- French VOC emission class A+
- Classification according to building certification systems see sustainability data sheet
- Declaration of no objection - tested for use in the food-related area (ISEGA research and investigation company mbH, Aschaffenburg)
- EMICODE® EC 1 Plus - very low emissions
Areas of application for clean room silicone:
- Elastic jointing in clean rooms and other medical rooms with high hygiene requirements and frequent use of cleaning agents and disinfectants, e.g. operating rooms, medical examination rooms, medical laboratories
- Elastic joints in clean rooms and production rooms with high hygiene requirements, e.g. electronics - chip production
- Production rooms of medicines and other medical articles
- Sealing of ventilation systems
- Hospitals, food processing plants
- Sealing of joints in the cold store area
Special instructions:
Before using the product, the user must ensure that the materials in the contact area are compatible with it and with each other and are not damaged or changed (e.g. discolored). In the case of materials that are subsequently processed in the area of the product, the user must clarify in advance that their ingredients or vapors cannot lead to any impairment or change (e.g. discoloration) of the product. If necessary, the user must consult the respective manufacturer of the materials.
Avoid physical contact with materials containing bitumen and plasticizers such as butyl, EPDM, neoprene, insulating and black paint. The interaction with chemicals in liquid and gaseous form, such as substances containing iodine, bromine or aldehyde, can cause discolouration of the sealant. If necessary, tests are to be carried out in advance of an operation! In the event of heavy chemical or physical stress on the joint, please consult the application technology department. In interior rooms without daylight or with only sporadic artificial lighting, alkoxy/oxime/amine silicone sealants can yellow over time, especially in transparent and light colors. If technically possible, it is advisable to use acetate silicone in these cases.
The vulcanization time increases with increasing layer thickness of the silicone. One-component silicones are not suitable for surface bonding unless the special design requirements are met. If the silicone sealant is to be used in a layer thickness of more than 15 mm, please contact the application technology department beforehand. Note on the processing of the color "stainless steel": Please note that when "modeling" the silicone, i.e. when silicone layers are pushed over one another (e.g. in the corner area), dark, clearly visible dividing lines appear. These lines can no longer be eliminated by subsequent smoothing. This effect only occurs in the color "stainless steel". The reason for this lies in the color pigment, which creates the metallic effect. This is a typical product feature in the color "stainless steel" and does not represent a product defect. To avoid this effect, care must be taken when smoothing that no silicone layers are pushed over one another. When renovating joints contaminated with mold, the existing elastic sealant must be completely removed. Before repointing, the affected joint areas must be treated with a suitable anti-mold spray to remove any fungal spores that may be present. Otherwise, the joint can very quickly become mold infested again, despite the sealant being treated with fungicides.
EMICODE® is a registered trademark of GEV e. V. (Dusseldorf)
pre-treatment:
The adhesive surfaces must be clean, free of grease, dry and stable. The adhesive surfaces must be cleaned and any contaminants such as release agents, preservatives, grease, oil, dust, water, old adhesives / sealants and other substances affecting adhesion must be removed. Cleaning non-porous surfaces: Clean with OTTO Cleaner T (airing time approx. 1 minute) and a clean, lint-free cloth. Cleaning of porous substrates: Remove loose particles from surfaces mechanically, e.g. with a steel brush or a grinding wheel.
Processing:
Processing temperature: +5ºC to +35ºC.
Application method: Spray with a hand gun, compressed air gun or battery gun.
Cleaning: With turpentine substitute before hardening, then with silicone remover or mechanically removable.
Smooth: With smoothing agent and peel-off spatula before skin formation.
Storage:
Can be stored cool and dry for at least 12 months.
Delivery form:
310ml cartridge
Colours:
RAL7035, RAL 9002, RAL 9010, RAL 9016, stainless steel, transparent, grey