Professional Well Foam Gun – 1K Ready-to-Use PU Foam
The Soudal Well Foam Gun is a professional 1K ready-to-use polyurethane foam, specially developed for sealing well rings and shaft rings. It offers excellent adhesion on almost all building materials (except PE, PP, PTFE, and silicone) and provides high thermal and acoustic insulation values.
- HFCKW- and CFC-free (Montreal Protocol) – propellant completely harmless to the ozone layer
- Paintable and plasterable surface
- Creates a fast (6–20 hrs) and watertight (up to 0.5 bar) connection
- Replaces traditional mortaring
- Excellent dimensional stability – no shrinkage and minimal post-expansion after curing
- Fast curing process
- Resistant to solvents, paints, chemicals, oil, gasoline, and bacteria/acids commonly found in soil
- Aging-resistant and rot-proof (not UV-resistant)
Standards and Approvals
- Water tightness test (Report No. 300.612 ofi, Vienna)
- Water tightness test (Report No. PB 2.4/06-492-1, MFPA, Leipzig)
Notes
Once cured, polyurethane foam must be protected against UV exposure by painting or sealing with sealants (e.g., silicone, polyurethane, acrylic, or MS polymer).
Applications
Ideal for sealing and joining well rings and shaft rings in manholes and domestic wastewater treatment systems.
Suitable Substrates
Compatible with all common building substrates (except PE, PP, PTFE, and silicone). Surfaces must be stable, clean, dust-free, and grease-free. Lightly moistening the surface improves adhesion, curing, and foam cell structure. Always perform an adhesion and compatibility test before application.
Processing Instructions
Protect adjacent surfaces before work begins. Screw the can firmly onto the gun thread and shake vigorously (approx. 30 times) to mix contents and optimize foam quality. Adjust the foam bead with the adjustment screw and apply evenly onto the shaft ring. The next ring should be placed within 10 minutes. Do not cut or smooth foam escaping from the joint.
Processing Temperature
- +5°C to +35°C (substrate temperature)
- +5°C to +25°C (can temperature)
If necessary, bring the can slowly to approx. 15°C by placing it in cool or warm water.
Cleaning
Use Gun Cleaner & Foam Cleaner before curing. After curing, remove mechanically or with PU Remover.
Repair
Repairs can be carried out using Well Foam.
Storage
18 months from production date in unopened packaging when stored cool (+5°C to +25°C) and dry. Store cans upright to prevent valve blockage. Opened containers must be sealed tightly and used quickly.
Packaging
750 ml aerosol spray can