Step-by-Step Guide
- Thoroughly clean the drill hole (remove dust and loose particles).
- Select the appropriate anchor adhesive – depending on the substrate.
- Evenly fill the adhesive into the drill hole.
- Insert the anchor and gently twist to distribute the adhesive.
- Allow curing time (follow manufacturer’s instructions).
- Insert and secure the screw.
Common Mistakes & How to Avoid Them
- Too much adhesive: leads to uneven curing.
- Wrong adhesive: always consider substrate and load requirements.
- No curing time: only insert screws after full curing.
- Unsuitable anchor size: adhesive does not replace proper dimensioning.
Product Recommendations
Our professional mounting adhesives and anchor adhesives offer the following benefits:
- High initial bonding strength
- Fast curing
- Resistance to moisture
FAQ – Frequently Asked Questions
- How do you properly glue an anchor?
- Clean the drill hole, fill in adhesive, insert the anchor, and allow curing.
- Which adhesive is suitable?
- Special anchor adhesives or mounting adhesives for heavy loads.
- Can anchors be glued into drywall?
- Yes, especially useful for crumbly walls.
- How long does the adhesive need to dry?
- Depending on the product, between 2–24 hours.
- Does a glued anchor hold as well as a normal one?
- Often even better, since it is additionally fixed.
- Can old anchors be glued afterwards?
- Yes, if the drill hole has broken out.
- What loads are possible?
- With mounting adhesive, anchors can safely hold even heavy loads.