Clean Primer 1226 is a solvent-based adhesion cleaner (clean primer) with adhesion additives. It significantly improves the bonding performance of sealants and adhesives on metallic substrates.
Solvent-Based Adhesion Cleaner with Additives
Specially formulated primer for OTTO Chemie sealants to ensure reliable adhesion.
Applications
- Improves adhesion of OTTO sealants on metallic substrates such as stainless steel, anodized aluminum, copper, galvanized steel, and chrome.
- Enhances adhesion on coated metals such as enamel and corrosion-protected iron.
- Optimizes bonding of Ottoseal S 54 special silicone on mastic asphalt screed.
- Improves adhesion of Ottocoll S 81 on PVC.
Special Notes
This primer is designed for use with sealants and adhesives to ensure optimal adhesion. Compatibility with OTTO sealants and adhesives has been tested and approved by our application technology team. For other OTTO product groups, substrates, sealants, adhesives, PU foam, or coatings not mentioned above, preliminary tests are recommended.
Avoid applying primer beyond the joint edges or bonding surfaces to prevent contamination or visual changes.
Surface Preparation
Bonding surfaces must be cleaned and free from release agents, preservatives, grease, oil, dust, water, old adhesives/sealants, and any substances that may impair adhesion.
- Non-porous substrates: Clean with OTTO Cleaner T (flash-off time approx. 1 minute) and a clean, lint-free cloth.
- Porous substrates: Mechanically clean surfaces (e.g., with a steel brush or grinding disc) to remove loose particles.
Application Instructions
Apply Clean Primer with a clean cloth and sufficient pressure to achieve an effective cleaning result. On asphalt, we recommend applying the primer evenly with a brush. The time interval between primer application and further processing may be several hours, provided dust contamination is avoided.
Due to the wide range of possible influences during processing and application, a preliminary test application is always required.