Product info:
Sikafloor 305 W is a lightfast, pigmented, matt, water-based polyurethane sealant, low-emission according to AgBB test criteria, water-based and low-odor.
low odor.
low-emission according to AgBB test criteria
water based
low odor
easy to clean
resistant to disinfectants
Application areas:
Sikafloor 305 W is intended for use by commercial processors only.
Pigmented, matt sealant for systems from the Sika ComfortFloor® and Sikafloor® MultiDur series, as well as for smooth Sikafloor® polyurethane coatings.
Processing instructions:
MIX
Stir component A mechanically before mixing. Before processing, carefully combine components A + B in the prescribed mixing ratio. To prevent splashes or even spilling of the liquid, mix the components for a short time at low speed using an infinitely adjustable electric mixer. Then increase the stirring speed to a maximum of 300 rpm for intensive mixing. The mixing time is at least 3 minutes and is only finished when a homogeneous mixture is present. To achieve an even surface, 5 – 7% water can be added to the material. After adding water, stir for 1 minute. Then wait 1 minute and then stir again for 1 minute. Pour the mixed material into a clean container (repot) and mix briefly again as described above.
PROCESSING
It is applied with a lint-free and solvent-resistant short-pile nylon or velor sealing roller.
In order to avoid multiple orders and wild overlaps, work areas must be divided. Otherwise an uneven appearance of the surface and streaking may occur. The application takes place at the specified temperatures without direct sunlight and drafts.
For larger areas, it is recommended that at least 2 or, preferably, several people carry out the job. One or more people place the material in one direction, and another person distributes the freshly applied sealing material in a crisscross pattern (90° angle). The final step is to roll the material perpendicular to the direction of application using a 50cm roller. It only rolls in one direction and the roller is raised at the end of a track. On larger areas, a 50 cm wide roller should be used for re-rolling. The distribution roller must be soaked/wetted with material and only be used for distribution and never for applying the sealant. The work must be carried out in a coordinated rhythm; the crossing must not be carried out too late. On large areas, the cross walk should be rolled standing on the fresh area. Blunt nails or soccer shoes should be worn. Always work fresh on fresh and pay attention to an even, optimal distribution when distributing. Avoid puddle formation as cloud formation is possible.
Coating structure / material consumption:
Primer and wear layer depending on the system
sealing
1-2 x Sikafloor®-305 W approx. 0.13 kg/m² per operation
Vertical surfaces
2 x Sikafloor®-305 W approx. 0.09 kg/m² per operation
Minimum + 10°C
Maximum + 30°C
Protect from condensation!
During application and curing, the substrate temperature must be at least + 3°C above the dew point temperature, otherwise danger
the condensation exists.
Storage:
Unopened containers have a shelf life of at least 18 years when stored in a cool, dry place.
Delivery form:
Tinplate bucket of 10 kg (A+B)
Colors:
Semi-gloss
Approximately 100 shades to choose from. There are slight color variations
Raw material-related reasons are unavoidable. Please note the color
of Sikafloor®-330 must approximately match the color of Sikafloor®-305 W
be adjusted. When applied to other surfaces, can
For light colors, such as yellow or orange, multiple coats may be necessary to achieve opacity. Own
Experiments are essential.
This product is a production product and cannot be exchanged!