Soudal Soudafoam PURe is a halogen-free polyurethane foam with high dimensional stability, designed for sealing and installing window and door frames as well as filling cavities. The foam does not shrink or expand after curing, making it ideal for professional construction and insulation applications.
- Halogen-free
- High dimensional stability (no shrinking or post-expansion)
- Very low emissions, EC1+ certified
- Flame-retardant (Building material class B1 – DIN 4102-1)
- Excellent adhesion to most substrates (except PE, PP, and PTFE)
- High filling capacity
- Free from Freon (harmless to the ozone layer and greenhouse effect)
- Elastic
Standards and Certifications
- Building material class B1 (DIN 4102-1) – Test certificate P-SAC 02/III-830 (MFPA Leipzig)
- EMICODE EC 1 PLUS – License 6911 (GEV Düsseldorf)
- Joint sound insulation (EN ISO 717-1) – Test report 19-004474-PR01 PB Z01-K05-04-de-01
- Thermal conductivity (DIN EN 12667) – PB 1.5/20-026-1 (MFPA Leipzig)
- Air permeability (EN 12114) – Test report 20-000006-PR02 PB-K05-02-en-02 (IFT Rosenheim)
- Water vapor permeability (EN ISO 12572) – Test report 20-000006-PR01 PB-K05-09-en-01 (IFT Rosenheim)
Product Features
- High dimensional stability (no shrinking or post-expansion)
- Very low emissions, EC1+ certified
- Flame-retardant (Building material class B1 – DIN 4102-1)
- Excellent adhesion to most substrates (except PE, PP, PTFE)
- High filling capacity
- Free from Freon (environmentally friendly)
- Elastic
- Superior sound and thermal insulation compared to mineral wool, cork, and fiberglass
- Easy and complete recycling via the P.D.R. system
- Halogen-free, contains no halogenated flame retardants or propellants
- Free from TCEP, TCPP, chlorinated paraffins, and plasticizers
- Meets DGNB criteria Quality Level 1–4 for window and door installation (line 38) and joint foams for insulation materials (line 39) – ENV1.2 local environmental risks – new construction – versions 2015 and 2018
Suitable Substrates
Compatible with common construction substrates such as concrete, masonry, stone, plaster, wood, corrosion-protected metal, polystyrene (EPS & XPS), PIR/PUR rigid foam, polyester, and rigid PVC. Not suitable for PE, PP, PTFE, or silicone. Surfaces must be load-bearing, clean, dust-free, and grease-free. Slightly moisten dry substrates to improve adhesion, curing, and foam cell structure. Always perform an adhesion and compatibility test before application.
Application Instructions
Ensure adequate ventilation when working indoors. Protect adjacent surfaces before starting. Secure deformable components such as window sills or door frames. Shake the can vigorously (approx. 30 times) before use to mix contents and optimize foam quality. Screw the can onto the gun firmly, adjust the screw to regulate foam flow, and apply evenly. For adapter tube use, attach to the valve and press sideways. Shake again after longer interruptions.
Fill joints and cavities only up to 2/3, as the foam expands. Apply foam from the deepest point of the cavity. For larger cavities, apply in layers of max. 40 mm, moistening between layers and waiting approx. 5 minutes before the next application. Replace empty cans immediately to prevent curing inside the gun. Cut off excess cured foam with a knife.
Packaging
500 ml aerosol spray can (net content)