Product Information:
Sikafloor 2510 W is a versatile, water-based epoxy resin floor coating known for its low VOC emissions and ease of application. Ideal for production areas, warehouses, and garages, it offers an easy-to-clean surface with high chemical and mechanical resistance.
Versatile Applications
Low VOC emissions
Good abrasion resistance
Good chemical and mechanical resistance
Low odor
Easy application
Low maintenance
Areas of Application:
Colored epoxy resin sealer for concrete and cementitious substrates
Suitable for surfaces subject to light to moderate mechanical stress and requiring good chemical resistance.
For production areas, warehouses, garages and parking spaces, etc.
This product is used as: primer, scratch coat, roller coating, thixotropic coating, self-leveling coating, and sealer.
Processing instructions:
The substrate must be sufficiently load-bearing (compressive strength at least 25 N/mm²). The surface must be even, fine-grained, solid, dry, free of grease and oil, and free of loose and flaking particles. The tear strength must not be less than 1.5 N/mm². Compatibility with existing coatings must be tested. Dense surfaces made of hard materials, as well as surfaces treated with curing agents, plasticizers, or other chemical additives, can impair the adhesion of coating materials if the substrate is inadequately prepared. Test areas must be created. Insufficiently load-bearing layers and contaminants must be removed mechanically, e.g., by blasting or milling. Any defects, holes, or breakouts must be leveled with Sika products. Clean primed or coated surfaces of any contaminants. Sweep away any loose sand.
Before mixing, stir component A mechanically. Carefully combine components A and B in the specified mixing ratio before use. To prevent splashing or spillage, mix the components thoroughly using a continuously adjustable electric mixer and briefly at low speed. Then increase the mixing speed to a maximum of 300 rpm for thorough mixing. Mix for at least 3 minutes and only finish when the mixture is homogeneous. Transfer the mixed material to a clean container and mix briefly again as described above.
When using Sikafloor 2530 W as a primer, apply the material thoroughly to the surface with a brush during the first coat to achieve even wetting. Subsequent coats can be applied with a roller. Color and gloss variations are unavoidable due to uneven material distribution, fluctuating layer thickness, and fluctuating ambient conditions. Waiting times during application may result in insufficient buildup. Ensure good ventilation during application and curing (especially at temperatures below +15°C). Otherwise, reaction problems cannot be ruled out.
Substrate temperature + 10°C + 20°C + 30°C
Walkable 2 days 15 hours 10 hours
Lightly loadable 5 days 3 days 2 days
Fully loadable 10 days 7 days 5 days
Consumption:
Primer: 0.15–0.2 kg/m² Sikafloor 2510 W + 10% water
Sealer: 0.15–0.2 kg/m² Sikafloor 2510 W
Delivery information:
5 kg tin buckets (A+B)
20 kg tin buckets (A+B)
Colors:
Almost all colors are available.
Colorless (yellowish transparent) as "Sikafloor-2530 W colorless." Minor color deviations are unavoidable due to the raw material. For light colors, such as yellow or orange, multiple coats are necessary to achieve sufficient coverage. Your own testing is essential. Epoxy resins are generally not permanently color-stable under UV and weather conditions.
This product is a production item and cannot be exchanged!