Sikafloor 2640

model
SF2640-30
manufacturer
Sika Chemie
Sika Chemie

Sikafloor 2640 is a fast-curing garage floor coating for trafficked surfaces in garages, parking garages, underground car parks and industrial areas.


655,59EUR / bucket
baseprice: 21,85EUR / pro kg
incl. 19% VAT plus shipping costs (to DE)
required field
Color: Please select
Scaled Prices
from 3 bucket622,81EUR - you save 32,78EUR, baseprice: 20,76EUR / pro kg
Delivery beginn within 2 - 10 daysDelivery beginn within 2 - 10 days **


Sikafloor 2640

Product Information:

Sikafloor 2640 is a pigmented, two-component, fast-curing epoxy resin coating for broadcast, drive-over parking garage and underground garage floors, or as a roller coating for industrial floors.

Fast curing
Very low odor during application
High abrasion resistance
High mechanical resistance
Glossy surface
De-icing salt resistant
Can be filled with quartz sand
Low emissions
Low yellowing

Areas of application:

Can be used as a system primer, broadcast layer, and sealer with high mechanical strength on concrete or cementitious substrates.

Lightly textured roller coating for normal to medium-heavy industrial surfaces.

Application instructions:

The substrate must be sufficiently load-bearing (compressive strength at least 25 N/mm²). The surface must be clean, cured, dry, free of grease and oil, and free of loose and flaking particles. The tensile strength of rigid, trafficable surface protection systems (OS 8) must not be less than 2.0 N/mm² on average and 1.5 N/mm² in individual cases. Insufficiently stable layers and contaminants must be removed mechanically, e.g., by blasting or milling. Any defects, holes, or breakouts must be filled with Sika products. Remove excess sand from sanded surfaces and clean with an industrial vacuum cleaner.

Before mixing, stir component A mechanically. Carefully combine components A and B in the specified mixing ratio before use. To prevent splashing or even spillage, mix the components briefly at low speed using an infinitely variable electric mixer. Then increase the mixing speed to a maximum of 300 rpm for thorough mixing. If Sikafloor 2640 is to be pre-filled with quartz sand (e.g., with the OS 8 system), add the specified amount of quartz sand after approximately 2 minutes. Mixing time is at least 3 minutes and is only complete when a homogeneous mixture is achieved. Transfer the mixed material into a clean container (repot) and mix again briefly as described above. When mixing and repotting the products, appropriate protective clothing must be worn: e.g., tight-fitting safety goggles, protective gloves, a long-sleeved shirt, work trousers, a rubber apron, and protective shoes.

To ensure even wetting of the substrate, we recommend thoroughly working the material into the surface (a second coat may be necessary). The material can be applied with a brush, roller, or rubber squeegee. The preferred method is a rubber squeegee. Follow with a cross-coat roller.

Substrate temperature: minimum +5°C, maximum +30°C
Working time: +5°C 30 min, +20°C 20 min, +30°C 15 min

Consumption:

Consumption varies depending on the system, whether it is applied in 2 or 3 layers, and whether quartz sand is added. See the data sheet for more information.

Primer: approx. 0.5 kg/m² Sikafloor 2640

Wearing layer: approx. 1.2 kg/m² Sikafloor 2640

Sealing: approx. 0.7 kg/m² Sikafloor 2640

Delivery form:

30 kg tin buckets (A+B)

Colors:

RAL 7016, 7023, 7030, 7032, 7035, 7037, 7038, 7040, 7042, 7043, 7044

This product is a production item and cannot be exchanged!

  • Prüfzeugnis für Oberflächenschutzsysteme nach DIN EN 1504-2 unter Berücksichtigung der DIN V 18026 “Oberflächenschutzsysteme für Beton aus Produkten nach DIN EN 1504-2: 2005-01”
  • Prüfung der Haftzugfestigkeit und Blasenbildung nach 56 und 230 Tage bei rückwärtiger Durchfeuchtung
  • WESSLING GmbH, Altenberge (DE): Unbedenklichkeitserklärung für den Einsatz als Bodenbeschichtung im indirekten Lebensmittelkontakt in lebensmittelverarbeitenden/lebensmittelvertreibenden Betrieben - Prüfbericht Nr. CAL20-082715-1 vom 30.06.2020
  • CE-Kennzeichnung (siehe Leistungserklärung)

Be the first to review this product.

We Also Recommend