OTTOSEAL® Silout Silicone Remover enables the easy removal of silicone joints and silicone residues from joints and contaminated surfaces. This thixotropic paste is specially designed for removing cured silicone sealants and adhesives, ensuring clean and silicone-free surfaces.
- Thixotropic paste for removing cured silicone sealants and adhesives
- Removes silicone from wood, masonry, plaster, concrete, glass, porcelain, metals, and plastics
- Compatible with various substrates in construction, window installation, and sanitary applications
- Leaves surfaces silicone-free after application
Areas of Application
- Removal of silicone residues from joints and contaminated surfaces
- Not suitable for nylon fibers (carpets, textiles)
- Non-ferrous metals (copper, brass, etc.) as well as galvanized and chrome-plated metals may be affected
- Polished natural stone surfaces become matte and require re-polishing – preliminary tests recommended
- Pre-tests required for painted surfaces and all other unlisted substrates
Special Notes
On absorbent substrates (e.g., concrete, plaster, natural stone), darkening of the treated area may occur. Polished natural stone surfaces will become matte and must be re-polished. On some plastics (e.g., polyamide), the treated surface may become matte and rough. Non-ferrous metals, galvanized, and chrome-plated metals may be affected. Not suitable for nylon fibers. Substrate compatibility is based on experience, but due to the wide variety of possible substrates, preliminary tests are strongly recommended before each application.
Application Instructions
Apply OTTOSEAL® Silout Silicone Remover generously to the surface. The application thickness should be 2–3 times the height (minimum 5 mm) of the silicone joint.
Reaction time (depending on silicone type):
- 0.5 mm: approx. 5 hours
- 2–3 mm: approx. 24 hours
The reaction speed depends mainly on:
- Layer thickness of the silicone to be removed
- Type of crosslinking system of the silicone sealant
After the reaction time, remove the dissolved silicone with a spatula and a damp cloth. Repeat treatment if necessary. Before re-jointing, all residues of OTTOSEAL® Silout Silicone Remover must be completely removed. Allow joint flanks and substrate to dry thoroughly. For cleaning, use OTTO Cleaner T or denatured alcohol. Especially with narrow or deep joints, or rough substrates (e.g., masonry, plaster, edge insulation strips), ensure that all residues are removed with a damp cloth. After sufficient drying time, clean again with OTTO Cleaner T or denatured alcohol. Residues of the remover will damage the new sealant. OTTOSEAL® Silout Silicone Remover does not harden; it remains a pasty mass.
Processing
- Application method: Brush
- Processing temperature: +5°C to +25°C
Storage
12 months from production date in unopened packaging when stored cool (+5°C to +25°C) and dry. Reseal opened containers tightly and use promptly.
Packaging
300 ml cartridge