Soudal Gun Foam Xtra 750 – High Yield PU Foam
Thanks to its special formulation, Soudal Gun Foam Xtra 750 delivers the foam yield of a 750ml PU foam can, even though it comes in a handy 500ml aerosol can. This makes it a practical and easy-to-use construction foam for professional applications.
Key Features
- Solvent-free
- Excellent dimensional stability – no shrinkage and minimal post-expansion after curing
- Outstanding adhesion on almost all building substrates (except PE, PP, PTFE, and silicones)
- Superior sound and thermal insulation compared to mineral wool, cork, and fiberglass
- Precise and economical dosing with a foam gun
- Fast curing
- Resistant to many solvents, paints, and chemicals
- Durable and rot-proof (not UV resistant)
- Water-resistant (not waterproof)
- Can be plastered, painted, or covered after curing
Applications
- Insulation in refrigerated trucks and cold storage construction
- Fixing and filling in apparatus engineering, metal construction, and electrical installations
- Mounting and foaming of window and door frames, as well as window sills
- Soundproofing
- Filling cavities such as wall penetrations, roof extensions, door frames, pipe ducts, roller shutter boxes, etc.
Standards and Certifications
- Building material class B2 (DIN 4102-1), test certificate P-SAC 02/III-165 (MFPA Leipzig)
- Thermal conductivity (DIN 52612), test certificate 060233.1-Hu (MPA Bau Hannover)
- Joint sound insulation: RST,w (C;Ctr) = 61 (-1;-3) dB (10 mm joint width), RST,w (C;Ctr) = 59 (-6;-4) dB (20 mm joint width), test report 16730101/1 (ift Rosenheim)
- Water vapor permeability (DIN EN ISO 12572), test report 51031013/2 R1 (ift Rosenheim)
- Air permeability (DIN 18542-based), test report 10531013/1 (ift Rosenheim)
Suitable Substrates
Compatible with common building substrates such as concrete, masonry, stone, plaster, wood, metal, polystyrene, PUR rigid foam, polyester, and rigid PVC. No adhesion on PE, PP, PTFE, and silicones. Substrates must be load-bearing, clean, dust-free, and grease-free.
Pre-treatment: Lightly moistening surfaces improves adhesion, curing, and foam cell structure. Always perform an adhesion and compatibility test on each substrate.
Processing Instructions
Screw the supplied adapter tube onto the valve and shake the can vigorously (approx. 30 times) with the valve facing down to ensure proper mixing and optimal foam quality. Fill joints or cavities only about one-third, as the foam expands further. Cut off excess cured foam with a knife.
- Application temperature: +5°C to +30°C (optimal: 15–25°C)
- Cleaning: Use foam gun cleaner before curing; after curing, removal is only possible mechanically.
Remarks
Cured polyurethane foam must be protected against UV exposure by painting or sealing with sealants (e.g., silicones, polyurethanes, acrylics, or MS polymers).
Packaging
500ml aerosol can (12 cans per carton)