Ottopur OP915 Waterproof Construction Foam

model
OP915-83
manufacturer
OTTO Chemie
OTTO Chemie

Ottopur OP915 ✔ 1K PU metering foam ✔ for interior & exterior use ✔ high foam yield ✔ very good sound & heat insulation ✔ universally applicable


6,89EUR / can
baseprice: 1,38EUR / 100 ml
incl. 19% VAT plus shipping costs (to DE)
Scaled Prices
from 12 can6,55EUR - you save 0,34EUR, baseprice: 1,31EUR / 100 ml
from 24 can6,34EUR - you save 0,55EUR, baseprice: 1,27EUR / 100 ml
from 36 can6,20EUR - you save 0,69EUR, baseprice: 1,24EUR / 100 ml
Delivery beginn within 2 - 10 daysDelivery beginn within 2 - 10 days **


Ottopur OP915 Waterproof Construction Foam

Ottopur OP915 PU Foam with Extremely High Yield for Foam Guns

Ottopur OP915 is a professional 1K polyurethane assembly foam with exceptionally high yield, specially designed for use with dosing guns and foam guns. Ideal for mounting and insulating door frames and window frames made of wood, steel, or plastic in masonry. This waterproof PU foam is also suitable as well foam for joining well and shaft rings in manholes and domestic wastewater treatment plants, as well as for bonding polystyrene rigid foam boards as perimeter insulation according to DIN 4108-2.

Key Features

  • 1K assembly foam / insulation foam made of polyurethane
  • Excellent dosing accuracy with foam guns
  • Highly economical in consumption
  • Long-term compliance with building material class B2
  • Ozone-friendly according to Montreal Protocol
  • CFC-free propellant
  • Meets the "50-gram rule" (propane-butane content not exceeding 50 g per 750 ml can)
  • Foam yield approx. 45 liters expanded per 750 ml can

Standards and Certifications

  • General building authority test certificate – normally flammable building material (B2) according to DIN 4102-1
  • EMICODE® EC 1 Plus – very low emissions
  • French VOC emission class A+

Applications

  • Mounting and insulating door frames and window frames made of wood, steel, or plastic in masonry
  • Mounting and insulating interior partition walls, window sills, etc.
  • Insulating connection joints between windows and masonry
  • Filling cavities of all kinds
  • Especially suitable for narrow seals, e.g. in old building renovation
  • Joining well and shaft rings in manholes and domestic wastewater treatment plants
  • Bonding polystyrene rigid foam boards as perimeter insulation according to DIN 4108-2

Processing Instructions

  1. Clean and thoroughly moisten substrates and components.
  2. Protect building elements against deformation (e.g. by bracing).
  3. Shake can well (at least 20 times). Remove valve protection cap.
  4. Screw Ottopur OP915 into adapter – do not overtighten!
  5. On first use, press trigger for approx. 10 seconds to flush material channel and remove residual moisture.
  6. Foam gun is now ready for use. Operating position: can upright, gun horizontal.
  7. Foam output is controlled via trigger and can be limited with adjustment screw.
  8. Before changing cans, shake new can well, unscrew empty can, and immediately (within 1 minute) replace with new Ottopur OP915.
  9. Perform can change quickly to prevent curing inside adapter.
  10. Remove uncured foam with Ottopur Cleaner.
  11. Remove cured foam residues at nozzle tip mechanically (e.g. with wood). Do not damage nozzle!

Special Notes

  • Always keep at least a partially filled can mounted to maintain pressure in the gun.
  • Never forcibly remove the can. Do not clean adapter with hard objects.
  • Fresh residues can be removed with acetone or Ottopur Cleaner.
  • In case of skin contact, wash immediately with water and soap.
  • When foam gun is taken out of service, clean immediately with Ottopur Cleaner.
  • Regular cleaning extends service life and functionality of dosing guns.
  • Cured foam residues can only be removed mechanically.
  • Can is pressurized – protect from sunlight and temperatures above +50 °C.
  • For waterproofing as well foam, cured PU foam must not be cut.
  • PU foam must be protected against UV exposure by painting, sealing (e.g. silicone, polyurethane, hybrid sealants), or covering.
  • For bonding perimeter insulation, apply vertical foam beads from bottom to top at 20–30 cm intervals and press insulation boards lightly against the wall within approx. 8 minutes (at 20 °C).
  • One 500 ml can is sufficient for bonding approx. 10 m² of insulation boards.

Packaging

500 ml aerosol spray can

From August 24, 2023, appropriate training must be provided before industrial or commercial use. See the foam can for more information.

FlammeAusrufezeichenGesundheitsgefahr
Gefahr
Extrem entzündbares Aerosol.Behälter steht unter Druck: kann bei Erwärmung bersten.Kann vermutlich Krebs erzeugen.Gesundheitsschädlich bei Einatmen.Kann die Organe schädigen bei längerer oder wiederholter Exposition.

Be the first to review this product.

Customers who bought this product also purchased

We Also Recommend