10,89EUR / cartridge
baseprice: 3,51EUR / 100 ml
incl. 19% VAT plus shipping costs (to DE)
required field
Color: Please select
Scaled Prices
from 20 Kartuschen10,56EUR - you save 0,33EUR, baseprice: 3,41EUR / 100 ml
from 40 Kartuschen10,35EUR - you save 0,54EUR, baseprice: 3,34EUR / 100 ml
from 60 Kartuschen10,02EUR - you save 0,87EUR, baseprice: 3,23EUR / 100 ml
from 100 Kartuschen9,80EUR - you save 1,09EUR, baseprice: 3,16EUR / 100 ml
Delivery beginn within 2 - 10 daysDelivery beginn within 2 - 10 days **


Ottoseal S70 natural stone silicone

Product Info:

S70 OTTOSEAL stone silicone is one of the highest quality natural stone High silicones in an incredibly vielfätigen Farbparlette.OTTOSEAL S70 stone silicone is suitable for Unterwasserverfugung in marble-stone pools.

Applications:

  • Sealing and grouting of all marble and natural stones, such as Sandstone, quartzite, granite, gneiss, porphyry, etc. in indoor and outdoor
  • Especially suitable for applications Fußbodenberei 
  • Motion Balancing bonding of natural stone to metal, eg Steps on a metal construction 
  • Suitable for Unterwasserverfugung in marble / natural stone swimming pools

Application Note:

During application and curing of OTTOSEAL S70 (identical to
Novasil S70) is to ensure good aeration. Joint edges and surfaces must be clean, dry, grease-free and sustainable. These are recommended OTTO T Cleaner or methylated spirits. In natural stone with Nassbeanspruchung
(Eg in bathrooms and shower facilities), we always recommend OTTO Primer 1216th OTTO Primer 1216 and dry for 15 minutes. For most natural stone without Nassbeanspruchung no primer is required. Deviating from this, there are natural stones, which is to achieve optimum adhesion, without Nassbelastung, our OTTO Primer 1216 is required. In the prison table, we have listed common natural stones. The adhesive sides of sandstone in principle with OTTOPrimer 1102 pretreatment, after the joint edges were cleaned with a brush. Other natural stones: Perform self-tests or question. For grouting of stone in swimming pool and sauna, and other underwater applications, please consult the Application of petrol chemistry. The Primer - Primer and order should be made very carefully because theSmearing or spraying on some marble and natural stone risk of staining is given. For smoothing marble-silicone leveling agents (undiluted). The use of otherwise conventional leveling agents (eg detergents, etc.) is discouraged because of the great sensitivity of some stain marble and natural stone. In any case, they must also diluted strengthens, his fresh and unused, in each case. Excess amounts of wash it out immediately and remove. spread, particularly in the unpolished natural stone surfaces do not have the silicone sealant joints, as all smears are difficult to remove. Because of the large number of possible influences during processing and the application is the user always make a sample processing and application. The concrete Aufbrauchsdatum is printed on the packaging printing and observed.

Processing:

Application temperature: +5 º C to +35 º C.
Mounting method ejaculate: With Hand Press pistol, air gun or gun battery.
Cleaning: with white spirit before curing, then with silicone or removed mechanically.
Smoothing and leveling agents with Abziehspachtel before skinning.

Storage:

Cool and dry at least 24 months shelf life.

Form:

310 ml cartridge (20 KTU. Per carton)

Color:

Adriatic blue, anthracite, charcoal, bahama beige, concrete-gray, brown, chinchilla, distelgrau structure, dark green, stainless steel, fugengrau, fugengrau structure, blue-gray structure, gray-red structure, light blue structure, light gray structure, herbstgrau jasmine, light gray, manhatten, matt anthracite nachtgrau, pearl gray rotbeige, sandrot structure, sand beige, sanitärgrau, silver-green structure, sunset, transparent, white

Primer Table – Ottoseal S70

The requirements for elastic sealing and bonding depend on external influences. Extreme temperature fluctuations, tensile and shear forces, and repeated contact with water place high demands on adhesion. In such cases, the use of the recommended primers (e.g., + / OTTO Primer 1216) is advisable to achieve the most durable bond possible.

Substrate / Material Primer Recommendation
ABS T
Acrylic glass / PMMA T
Acrylic sanitary (e.g. bathtubs) + / 1101
Aluminium bare +
Aluminium bare (permanent wet / underwater) 1216
Aluminium anodized +
Aluminium anodized (permanent wet / underwater) 1216
Aluminium, powder-coated 1101 / T
Aluminium, powder-coated (teflon-based) T
Concrete 1105 / 1215 / 1218
Concrete (permanent wet / underwater) 1218
Cast stone 1216
Lead +
Stainless steel 1216
Iron +
Epoxy resin coating + / 1216
Glass +
Wood, lacquered (solvent-based) +
Wood, lacquered (water-based) +
Wood, glazed (solvent-based) +
Wood, glazed (water-based) +
Wood, untreated + (1)
Ceramic, glazed + (2)
Ceramic, glazed (permanent wet / underwater) 1216
Ceramic, unglazed +
Ceramic, unglazed (permanent wet / underwater) 1218
Clinker brick + / 1216
Artificial stone + / 1216
Plastic profiles (rigid PVC, e.g. Vinnolit) + / 1227
Copper + / 1216 (3)
Melamine resin panels + / 1216
Brass + / 1216 (3)
Mineral composite + / 1216 / 1225
Natural stone + / 1216 (4)
Natural stone (marble, granite etc., permanent wet / underwater) 1216 / 1218 (5)
Polyester +
Polyester (permanent wet / underwater) 1217
Polypropylene (PP) T
Aerated concrete 1105 / 1215
Plaster + / 1105 / 1215
PVC rigid 1217 / 1227
PVC soft / swimming pool foil + / 1217 / 1227
Sandstone 1102
Tinplate 1216
Zinc, galvanized iron 1216

Legend: + = adhesion possible without primer, T = adhesion test required, numbers = recommended OTTO primers.

Technical Data – Ottoseal S70
Property Value
Skin formation time at 23 °C / 50 % r.h. [min] ~ 10
Curing in 24 h at 23 °C / 50 % r.h. [mm] ~ 2 – 3
Application temperature range [°C] +5 / +35
Viscosity at 23 °C pasty, stable
Density at 23 °C according to ISO 1183-1 [g/cm³] ~ 1.0
Density at 23 °C according to ISO 1183-1, matt [g/cm³] ~ 1.3
Shore-A hardness according to ISO 868 ~ 18
Shore-A hardness according to ISO 868, matt ~ 30
Permissible total deformation [%] 25
Tensile stress at 100 % according to ISO 37, type 3 [N/mm²] ~ 0.5
Elongation at break according to ISO 37, type 3 [%] ~ 600
Tensile strength according to ISO 37, type 3 [N/mm²] ~ 1.4
Temperature resistance range [°C] -40 / +180
Extrusion rate according to ISO 8394-1 [g/min] ~ 130 – 160
Volume shrinkage according to ISO 10563 [%] ~ 6
Shelf life at 23 °C / 50 % r.h. for cartridge/bag [months] 151)

1) From date of manufacture

5,0 based on 2 ratings

5 Stars (2)
4 Stars (0)
3 Stars (0)
2 Stars (0)
1 Star (0)

(guest) . commented 02/26/2026

Matches very well with Stainless steel sheeting. Quick delivery

Daniel D. commented 06/21/2023

Very easy to use great product great finish matches very well to the stainless steel panels

Customers who bought this product also purchased

We Also Recommend