Otto Chemie Primer 1102 Natural Stone & Sandstone Primer

model
pr1102
manufacturer
OTTO Chemie
OTTO Chemie

Otto Primer 1102 ✔ Sandstone primer ✔ Improves adhesion of natural stone silicones ✔ Very short flash-off time ✔ Solvent-based ✔ Toluene-free ✔ For long-lasting bonds


7,09EUR / can
baseprice: 7,09EUR / 100 ml
incl. 19% VAT plus shipping costs (to DE)
Delivery beginn within 2 - 10 daysDelivery beginn within 2 - 10 days **


Otto Chemie Primer 1102 Natural Stone & Sandstone Primer

Otto Primer 1102 – the professional natural stone primer and sandstone primer. Designed to improve the adhesion of natural stone silicones for long-lasting sealing results.

  • Single-component silicone resin solution
  • Specially formulated primer for natural stone sealants

Areas of Application

Otto Primer 1102 enhances the adhesion of natural stone silicones such as Ottoseal S 70, Ottoseal S 117, Ottoseal S 130, and Ottoseal S 140 on sandstone substrates.

Special Notes

This primer has been developed for use with sealants and adhesives to ensure optimal bonding. Compatibility with OTTO sealants and adhesives has been tested and approved by our application technology team. For other OTTO product groups, substrates, sealants, adhesives, PU foams, or coatings not mentioned above, preliminary tests are recommended.

Avoid applying primer or clean primer beyond joint edges and bonding surfaces to prevent contamination or visual changes.

Surface Preparation

Bonding surfaces must be clean and free from release agents, preservatives, grease, oil, dust, water, old sealants/adhesives, and any substances that may impair adhesion.

  • Non-porous substrates: Clean with OTTO Cleaner T (flash-off time approx. 1 minute) and a clean, lint-free cloth.
  • Porous substrates: Mechanically clean surfaces (e.g., with a steel brush or grinding disc) to remove loose particles.

Application

Apply the primer carefully with a suitable brush to the joint flanks. Avoid wetting the natural stone surface next to the joint flanks to prevent staining. A minimum drying time of 15 minutes is required. Depending on conditions, the time between primer application and further processing may extend to several hours if dust exposure is avoided.

Due to the variety of possible influences during processing and application, a trial application is always recommended. The exact expiration date can be found on the packaging and must be observed.

Storage

12 months from production date in unopened packaging when stored in a cool (+5°C to +25°C) and dry place. Reseal opened containers tightly and use promptly.

Packaging Units

  • 100 ml aluminum bottle (15 bottles per carton)
  • 250 ml aluminum bottle (15 bottles per carton)
  • 1000 ml aluminum bottle (5 bottles per carton)

Be the first to review this product.

Customers who bought this product also purchased

We Also Recommend