PERIMETERKLEBER is a high-performance PU foam polyurethane adhesive designed for bonding polystyrene rigid foam boards as perimeter insulation, as well as insulation boards and drainage elements. This solvent-free adhesive ensures excellent adhesion between perimeter insulation boards and basement wall surfaces such as concrete, coated bitumen membranes, and thick bitumen coatings. With an impressive yield of approx. 14 m² basement wall surface per 750 ml can and strong initial adhesion, installation of perimeter insulation becomes significantly easier and more efficient.
Applications
- Bonding of polystyrene rigid foam boards as perimeter insulation according to DIN 4108-2 (not suitable for pressurized water).
- Bonding of insulation boards and drainage elements.
Suitable Substrates
Compatible with all common construction substrates such as concrete, masonry, stone, plaster, wood, metal, polystyrene, coated bitumen membranes, and cold-applied thick bitumen coatings. Not suitable for PE, PP, PTFE, or silicone. Adhesion surfaces must be load-bearing, clean, dust-free, and grease-free.
Application Instructions
Screw the can firmly onto the gun thread and shake vigorously about 30 times with the gun pointing downward to ensure proper mixing and optimal adhesive quality. Adjust the adhesive bead using the gun’s adjustment screw.
Hold the gun as vertically as possible during application. Apply PERIMETERKLEBER from bottom to top in strips with approx. 25 cm spacing (minimum three beads per continuous board, or at least two beads for short boards). The nozzle should not touch the insulation board or basement wall. Maintain a distance of 1–2 cm between nozzle and surface during spraying. Wait briefly, then press the insulation board firmly against the basement wall within approx. 8 minutes. To prevent slipping, lightly fix the boards. Fill all open joints within the insulation with PERIMETERKLEBER. Once fully cured, cut off excess adhesive with a knife.
Processing Conditions
- Adhesion surface temperature: +5°C to +35°C
- Can temperature: +15°C to +25°C (if necessary, slowly bring the can to optimal temperature in cool or warm water)
Cleaning: Use gun and foam cleaner before curing. After curing, removal is only possible mechanically.
Storage
12 months from production date in unopened packaging when stored cool (+5°C to +25°C) and dry. Cans must be stored upright to prevent valve blockage. Opened containers should be sealed tightly and used promptly.
Packaging
750 ml aerosol spray can
Color
Yellow