Sika Ergodur 500 Pro

Sika Ergodur 500 Pro

0 of 5 Stars!(0 reviews) reviews

Delivery beginn within 24hrs Delivery beginn within 24hrs **
 

Sika Ergodur 500 Pro is a two-component reaction plastics based on epoxy resin. Bound system, tested on an open flame special sealant material as a primer and protection of concrete bridges.

Manufacturer:Sika
Model:SE500PRO
Available Options:
Please select one of the following options.
« Overview
318,49EUR excl. 19% Tax plus shipping costs baseprice: 10,62EUR / pro kg


Sika Ergodur 500 Pro

Product info:

Sika Ergodur 500 Pro is a two-component reaction plastics based on epoxy resin. Bound system, tested on an open flame special sealant material as a primer and protection of concrete bridges.

  • tested Product
  • Already used to 7 days old concrete
  • High adhesive strength
  • Cures at low temperatures to +8 ° C pending
  • Temperature resistance in conjunction with an open flame and poured asphalt job



Fields of application:

Bound system, tested on an open flame special sealant material as a primer and protection of concrete bridges. Sika Ergodur-500 Pro also serves as a binder to prepare a scratch coat, etc. in order to equalize bumps, holes in the concrete surface or as a binder for the production of repair mortar.

Processing instructions:

Sealing (Federal seal)
In the first stage, a reactive resin in an amount of minutes. 400 g/m2 flutend applied distributed with moss rubber squeegee and evenly rolled with a lambswool roller.
This situation reactive resin must immediately after rolling with dry quartz sand 0.7 - 1.2 mm are sprinkled (Sikadur ® -509) in excess. Not firmly adhering gritting must be removed as soon as it is safe to hardening state this position.
Subsequently, in a second step reaction resin in an amount of minutes. 600 g/m2 evenly applied and distributed so that material accumulations are avoided, the topping is wetted evenly and uniformly rough and apparently closed surface is present. This surface is not sprinkled.
Scratch coat approximately 1: 3 to 1: 4 emaciated
Depressions up to about 0.5 cm-500 Ergodur per emaciated by a scratch coat with Sika with quartz sand 0.3 - 0.9 mm (Sikadur 501) to compensate. Before order the scratch coat the concrete surface is about 400 g/m2 to Sika ® Primer-500 Pro Ergodur. This is followed by the scratch coat "fresh-in-fresh". The scratch coat is dry silica sand 0.3 - 0.9 mm sprinkle (Sikadur 501), a sprinkling in excess should be avoided. Not firmly adhering Abstreugut is after
Curing the scratch coat to remove.
Large-scale depressions
Supplements for the scratch coat:
- 33% quartz sand 0.1 - 0.5 mm (Sikadur ® -505)
- 66% quartz sand 0.7 - 1.2 mm (Sikadur ® -509)

consumption:

Sealing (Federal seal)
1st step: Approx. 400 g/m2
Second operation: Approx. 600 g/m2
scratch coat
Theoretical consumption
per 1 mm scratch coat: Approx. 900 g/m2 Sika Erdogur-500 Pro
+ 1.0 kg/m2 Sikadur 501 (mixed)

Approvals / Standards:

  • Basic examinations TL / TP-BEL-EP: Polymer Institute, Florsheim-Wicker (DE): Test Report No. P4636 from 04.08.2006


storage:

Sealed containers in a cool and dry place for at least 12 months.

Delivery form:

Tinplate bucket of 30 kg (A + B)

colors:

Reddish brown, transparent

Tok Band SK N2Tok Band SK N2
Price on request  
   
 

Tok Band SK N2

Manufacturer: Denso
Item number: 10088
Delivery beginn within 3-5 days Delivery beginn within 3-5 days **

The TOK Band SK N2 is a high-quality bituminous joint tape made of polymer-coated road bitumen with excellent stretch and adhesion properties, especially at lower temperatures. The TOK Band SK N2 is provided on one side with a homogeneous, homogeneous adhesive layer (smooth side) and can therefore be adhered to the "cold" joint edge quickly, safely and without the use of a gas burner.

Bookmark this page on .

loading... Sika Ergodur 500 Pro Sika Ergodur 500 Pro Sika Ergodur 500 Pro Sika Ergodur 500 Pro Sika Ergodur 500 Pro Sika Ergodur 500 Pro