Sika Primer-115 for JGS and Biogas Plants
Sika Primer-115 is a mandatory system primer for use with Sikaflex sealants such as Sikaflex TS Plus, Sikaflex PRO-3 SL, and Sikaflex-406 KC on absorbent substrates. It is essential in combination with Sikaflex TS Plus for applications on concrete, according to approval Z-74.62-151.
Applications
- For use with Sikaflex sealants
- For porous, absorbent substrates such as concrete and freshly cut asphalt (according to DIN EN 13108-1 and DIN EN 13108-6 with at least 50% aggregate on the surface)
- System primer for Sikaflex TS Plus (Z-74.62-151)
- Short flash-off time
Application Instructions
Joint flanks must be load-bearing, firm, clean, dry, and free from oil, grease, dust, loose particles, cement laitance, paint, hydrophobic agents, and anti-graffiti coatings.
Primarily intended for porous, absorbent substrates such as concrete and freshly cut asphalt (DIN EN 13108-1 and DIN EN 13108-6 with at least 50% aggregate on the surface).
Mandatory system primer in combination with Sikaflex TS Plus for concrete applications, according to building authority approval Z-74.62-151.
Apply Sika Primer-115 evenly with a clean brush. On smooth, non-absorbent substrates, a solvent-resistant roller or melamine sponge (e.g., Basotect) may also be used. Apply primer only once. For highly absorbent substrates, a second application may be required. Reseal containers tightly immediately after use.
Storage
Store in unopened packaging in a cool (+5°C to +25°C), dry place. Opened containers must be tightly resealed and used promptly.
Packaging
1000 ml can