Product information:
Sikafloor 4005 Balcony Waterproofing is a UV- and weather-resistant, crack-bridging waterproofing layer for balconies and terraces. The elastic liquid-applied waterproofing is easy to apply by hand.
Sikafloor 4005 meets the requirements of DIN 18531-5
2 mm layer thickness possible in a single application
No glass fiber reinforcement: Time-saving and visually appealing (no overlaps or joints in the surface)
Excellent ventilation
Self-leveling (attractive, smooth surfaces)
Low odor
Areas of application of Sikafloor 4005 Balcony Coating:
Waterproofing of balconies, terraces, and access galleries according to DIN 18531-5.
Waterproofing system in combination with a decorative topcoat and sealant
Applicable on vertical elements and slopes
Substrate:
The surface must be clean, dry, and free of all contaminants. Insufficiently stable layers and contaminants such as dust, oil, grease, etc. must be removed. The tensile bond strength must not be less than 1.5 N/mm². The compressive strength must be at least 25 N/mm². If in doubt, a test area should be prepared. Sikafloor 4005 is always applied over a primer.
Processing Instructions:
Stir component A thoroughly before use. Add component B to component A (according to the specified mixing ratio) and mix thoroughly with an electric mixer. A one- or two-arm basket mixer (300-400 rpm) is recommended. Mixing time is at least 3 minutes and is only complete when a homogeneous mixture is achieved. Transfer the mixed material to a clean container (pot) and mix briefly again. Scrape the sides and bottom of the container with a spatula to ensure even mixing. Avoid incorporating air. Wear appropriate protective clothing when mixing and processing the products.
Consumption:
Approx. 1.35 kg/m²/mm
Delivery:
13.5 kg bucket
Colors:
Gray
This product is a production item and cannot be exchanged!