Insulation Adhesive is a high-quality, solvent-free, single-component polyurethane adhesive foam (PU foam) designed for efficient, clean, economical, and permanently secure bonding of thermal insulation boards in roofing applications. It ensures optimal thermal insulation and delivers strong initial adhesion even at low temperatures. Suitable for vertical applications, this innovative adhesive foam compensates for uneven surfaces and cures quickly, allowing further processing after just 2 hours. Compared to conventional PU roof adhesives, Insulation Adhesive offers significant weight reduction, space savings, and up to 30% reduction in working time. With precise dosing, one can of adhesive covers up to approx. 14 m² of insulation.
- Up to 30% reduction in working time
- High initial adhesion – even at low temperatures
- Economical consumption thanks to precise dosing
- Suitable for vertical bonding
- Usable from +5°C can temperature and -5°C ambient temperature
- Thermal conductivity of 0.035 W/(m·K) – ideal for filling joints between insulation boards
- Flexible and non-brittle
- Compensates uneven surfaces optimally
- Reduced post-expansion enables fast and reliable alignment of insulation boards
- Easy and complete disposal of packaging via the P.D.R. system
- Significant weight reduction and space savings compared to traditional PU roof adhesives or mortar
- Fast curing – further work possible after approx. 2 hours
- HFCKW- and FCKW-free (Montreal Protocol) – propellant is completely harmless to the ozone layer
- Solvent-free
- Resistant to many solvents, paints, and chemicals
- Durable, rot-proof, mold- and decay-resistant (not UV-resistant)
- Water-resistant (not waterproof)
- Building material class B1 (flame-retardant) according to DIN 4102 Part 1
Application Areas
Designed for efficient, clean, economical, and permanently secure bonding of thermal insulation boards made of polystyrene (EPS + XPS), polyurethane, and phenolic resin rigid foam in construction. Ideal for filling cavities between insulation elements. Suitable for bonding insulation boards in flat roofs, perimeters, facades, drainage elements, basement ceilings, and more.
Processing Instructions
Protect adjacent surfaces before starting work. In strong winds, ensure that the lightweight adhesive does not contaminate nearby components or objects. Screw the can firmly onto the gun thread and shake vigorously about 30 times with the gun pointing downward to mix contents thoroughly and optimize adhesive quality. Repeat shaking after longer interruptions. Adjust the adhesive bead to approx. 30 mm diameter using the gun’s adjustment screw. Apply directly to the substrate, keeping the gun vertical. At least 3 beads per m² are required; increase adhesive quantity in edge areas or under higher wind suction loads (DIN 1055, Part 4). Maintain a 1–2 cm distance between nozzle and substrate during application. Press insulation boards within approx. 8 minutes. Lightly spraying the adhesive bead accelerates curing. Fill all open joints with adhesive. Do not load or walk on bonded areas during curing (approx. 2 hours). Remove excess cured adhesive with a sharp knife.
Processing Temperature
- -5ºC to +35ºC (surface temperature)
- +5ºC to +25ºC (can temperature) – optimal +15ºC to +25ºC
If necessary, slowly bring the can to optimal temperature using cool or warm water.
Cleaning: Use Gun Cleaner & Foam Cleaner before curing; afterwards remove with PU Remover or mechanically.
Repair: Possible with Insulation Adhesive.
Standards and Approvals
- Building material class B1 (DIN 4102-1), Test certificate P-SAC 02/III-276 (MFPA, Leipzig)
- Adhesion strength test report No. 09-008 (IFBT, Leipzig)
Storage
12 months from production date in unopened packaging when stored cool (+5ºC to +25ºC) and dry. Store cans upright to prevent valve blockage. Seal opened containers tightly and use promptly.
Delivery Form
750 ml aerosol spray can (12 cans per carton)