Product info premium acrylic sealant:
Ottoseal A205 is a premium acrylic sealant, which allows an unbelievable practical movement absorption of 18%. After complete curing, it has a temperature resistance of an incredible -20 C to +80 C. It was not rated "very good" in the ÖKO test guide "Building, Living and Renovating" for nothing.
Areas of application Ottoseal A205 Acryl:
Primarily suitable for interior construction, but can easily be used outdoors at temperatures above +5 ° C
Expansion and connection joints with little stress, e.g. between wooden window or door frames and masonry, plaster or concrete
Joints and connections to concrete, aerated concrete, plaster, masonry, wood, plasterboard, fiber cement, roller shutter boxes, window sills, etc.
Standards and tests:
"Recommended for residential medicine" by the German Committee for Residential Medicine and Building Hygiene
Suitable for applications in accordance with IVD data sheet No. 16
Pretreatment:
The adhesive surfaces must be clean, free of dust and grease, and stable. The adhesive surfaces must be cleaned and any contaminants such as release agents, preservatives, grease, oil, dust, water, old adhesives / sealants and other substances that impair adhesion must be removed. Cleaning of non-porous surfaces: cleaning with OTTO Cleaner T (airing time approx. 1 minute) and a clean, lint-free cloth. Cleaning of porous substrates: surfaces
mechanically, e.g. with a steel brush or a grinding wheel, remove loose particles. Absorbent mineral adhesive surfaces should be moistened with water to improve adhesion. The following are also available to improve adhesion: on absorbent surfaces - mixture of acrylic sealant / water 1: 2 - on absorbent and non-absorbent surfaces: OTTO PrimerProcessing:
Spray the sealant evenly with a hand gun or compressed air gun, press the surface with a moistened tool before skin begins to form. Remove fresh contaminants with water. Because of the large number of possible influences during processing and use, the processor must always carry out a test processing and application. The specific use-by date can be found on the container imprint and must be observed. We recommend storing the adhesives / sealants in the unopened original containers in a dry place (<60% RH) in a temperature range of + 15 ° C to + 25 ° C. Will the products last for long periods of time
If stored and / or transported (several weeks) at higher temperature / humidity, a reduction in the shelf life or a change in the material properties cannot be ruled out.
Storage:
Can be stored in a cool and dry place for at least 12 months.
Delivery form:
600 ml tubular bag (20 bags per box)
Colour:
white, concrete gray