Assembly Foam for fast installation and insulation of door frames, window sills, and window frames made of wood, steel, or plastic to masonry.
- Excellent dimensional stability – no shrinkage and minimal post-expansion after curing
- Outstanding adhesion on almost all construction substrates (except PE, PP, PTFE, and silicone)
- Superior soundproofing and thermal insulation compared to mineral wool, cork, and fiberglass
- Fast curing for efficient installation
- Resistant to many solvents, paints, and chemicals
- Durable, rot-proof, and aging-resistant (not UV-resistant)
Applications
- Insulation in refrigerated truck and cold room construction
- Fixing and filling in apparatus engineering, metal construction, and electrical installation
- Mounting and foaming of window and door frames as well as window sills
- Soundproofing and thermal insulation
- Foaming cavities such as wall penetrations, roof extensions, door frames, pipe ducts, roller shutter boxes, etc.
Suitable Substrates
All common construction substrates (except PE, PP, PTFE, and silicone). Surfaces must be load-bearing, clean, dry, dust- and grease-free.
Pre-treatment: Lightly moistening the surfaces improves adhesion, curing, and foam cell structure. It is recommended to perform an adhesion and compatibility test on each substrate.
Processing
Screw the supplied adapter tube onto the valve of the foam can. Shake the can vigorously about 30 times with the valve pointing down to ensure proper mixing and optimal foam quality.
Fill joints and cavities only up to one-third, as the foam will expand. Cut off excess cured foam with a knife.
Processing temperature: +5°C to +30°C (optimal: 15–25°C)
Cleaning: Use foam cleaner and gun cleaner before curing. After curing, removal is only possible mechanically.
Notes
Cured polyurethane foam must be protected against UV exposure by painting or sealing with sealants (e.g., silicone, polyurethane, acrylic, or MS polymer).
Standards and Approvals
Building material class B2 (DIN 4102-1), Test certificate P-SAC 02/IV-010 (MFPA, Leipzig)
Storage
Store unopened packaging in a cool (+5°C to +25°C), dry place. Foam cans must be stored upright to prevent valve sticking. Reseal opened containers tightly and use shortly thereafter.
Packaging
750 ml aerosol spray can