Tok SK Cracking Tape Road Construction

Tok SK Cracking Tape Road Construction

0 of 5 Stars!(0 reviews) reviews

Delivery beginn within 3-5 days Delivery beginn within 3-5 days **
 

The TOK SK Cracking Tape is a high-quality bituminous profile made of polymer-modified road bitumen for quick and cost-effective remediation of damaged asphalt road construction.
The TOK SK tear tape is provided on one side with a homogeneous, homogeneous adhesive layer and can therefore be quickly, safely and without the use of a gas burner on the cold asphalt glued.

Manufacturer:Denso
Model:10079008
Available Options:
Please select one of the following options.
« Overview
235,38EUR incl. 19% Tax plus shipping costs baseprice: 2,56EUR / pro m


Tok SK Cracking Tape Road Construction

Product info TOK Crack Tape Road Surface:

The TOK SK Cracking Tape is a high-quality bituminous profile made of polymer-modified road bitumen for quick and cost-effective remediation of damaged asphalt road construction.
The TOK SK tear tape is provided on one side with a homogeneous, homogeneous adhesive layer and can therefore be quickly, safely and without the use of a gas burner on the cold asphalt glued.

Application areas:

The TOK SK tear tape is preferably used to cover cracks and open joints or seams in asphalt surfaces. The maximum width of the crack openings should not exceed 5 mm. The profile can be safely and quickly laid without the use of a gas burner. Damaged areas can be permanently closed, as the TOK®-SK tear tape is rolled in due to its plastic properties.

Processing of the tear tape for roads:

Weather conditions:
The weather conditions should correspond to the specifications of the ZTV Fug-StB (bitumen joint tapes). Accordingly, the TOK SK rip band should only be installed in dry weather with a surface temperature of the asphalt surfaces of at least + 5 ° C (+ 41 ° F).
At temperatures from 0 ° C to + 5 ° C (+ 30 ° F to + 41 ° F), work can only be continued if additional measures are taken (eg pre-heating of the substrate).
Requirements and use of the TOK SK tear tape:
The asphalt surface must be clean and dry.
The primer TOK SK Primer is required and improves the adhesion to the substrate. Depending on the weather, the priming time of the primer is only 3-5 minutes in summer, which allows it to continue working quickly.
Processing:
After bleeding the TOK SK primer, the TOK SK tear tape is placed on the crack with the adhesive layer facing downwards and pressed down with a roller or the SK Roller ripper (only 40x4 mm).
Subsequent traffic rolls the mass further into the crack.
It may be advantageous to sprinkle the TOK SK Crack Tape after installation.
This applies, for example, for laying at very high temperatures.
The ambient and component temperature should be above + 10 ° C (50 ° F) to ensure good and lasting adhesion to the substrate.
At lower temperatures, remedial action may be taken with light, careful heating of the substrate.
The TOK SK tear tape is not suitable for the vertical formation of seams and connections, here the minimum requirement of the profile thickness according to the ZTV Fug-StB is 10 mm.

Storage:

Store dry, without load and frost-free under normal conditions (ideally 15-20 ° C / 59-68 ° F).
Under these conditions the TOK SK Rip Tape can be stored for at least 2 years from the date of manufacture in the unopened original packaging.

Packaging:

The TOK SK Rip Tape is delivered rolled up in worm form. Depending on the cross-sectional shape, the screws are separated by silicone paper - in boxes of dimensions (wxdxh) 370mm x 370mm x 160 (or 144) mm. Each 30 boxes are packed on a Euro pallet (800 x 1200 mm).

Dimension 35 x 4mm; 92m per box; 2760m per pallet
Dimension 40 x 4mm; 69m per box; 2070m per pallet
Dimension 60 x 4mm; 46m per box; 1380m per pallet

Sika Ergodur 500 ProSika Ergodur 500 Pro
379,00EUR
incl. 19% Tax plus shipping costs
baseprice: 12,63EUR / pro kg

Sika Ergodur 500 Pro

Manufacturer: Sika
Item number: SE500PRO
Delivery beginn within 24hrs Delivery beginn within 24hrs **

Sika Ergodur 500 Pro is a two-component reaction plastics based on epoxy resin. Bound system, tested on an open flame special sealant material as a primer and protection of concrete bridges.

Bookmark this page on .

loading... Tok SK Cracking Tape Road Construction Tok SK Cracking Tape Road Construction Tok SK Cracking Tape Road Construction Tok SK Cracking Tape Road Construction