OTTO Primer 1227 PU Plastic Primer – adhesion promoter for sealants and adhesives on various plastics.
- Improves adhesion on many plastics
- Flash-off time: minimum 30 minutes (maximum 3 hours)
- Toluene-free
Areas of Application
Enhances adhesion of sealants and adhesives on plastics (e.g., PVC and similar materials).
Special Notes
This primer has been developed for sealants and adhesives to ensure optimal adhesion in combination with them. Compatibility with OTTO sealants and adhesives has been tested and approved by our application technology team. For other OTTO product groups, substrates, sealants, adhesives, PU foams, or coatings not mentioned above, we recommend preliminary tests. Do not apply primer or clean primer beyond the joint edges and bonding surfaces to avoid contamination or visual changes.
Surface Preparation
Bonding surfaces must be cleaned and free from release agents, preservatives, grease, oil, dust, water, old sealants/adhesives, and other substances that impair adhesion.
- Non-porous substrates: Clean with OTTO Cleaner T (flash-off time approx. 1 minute) and a clean, lint-free cloth.
- Porous substrates: Mechanically clean surfaces (e.g., with a steel brush or grinding disc) to remove loose particles.
Application
Apply OTTO Primer 1227 thinly with a suitable brush. Ensure an even, thin layer – excess primer forms a film that reduces adhesion. Plastic surfaces may be roughened before priming to further improve adhesion. A drying time of at least 30 minutes is required. The maximum processing window is 24 hours, provided dust contamination is avoided.
Storage
Shelf life: 12 months from production date in unopened packaging. Store in a cool (+5°C to +25°C), dry place. Reseal opened containers tightly and use promptly.
Packaging
- 100 ml aluminum bottle (15 bottles per carton)
- 1000 ml aluminum bottle (5 bottles per carton)