Soudal insulation adhesive adhesive foam

model
dämkle
manufacturer
Soudal
Soudal

Soudal Insulation Adhesive Foam ✔ Fast application ✔ Strong adhesion ✔ Heat-insulating ✔ For EPS/XPS boards ✔ Saves time & material


16,49EUR / can
baseprice: 2,06EUR / 100 ml
incl. 19% VAT plus shipping costs (to DE)
Scaled Prices
from 12 can16,00EUR - you save 0,49EUR, baseprice: 2,00EUR / 100 ml
from 24 can15,67EUR - you save 0,82EUR, baseprice: 1,96EUR / 100 ml
from 36 can15,17EUR - you save 1,32EUR, baseprice: 1,90EUR / 100 ml
from 48 can14,84EUR - you save 1,65EUR, baseprice: 1,86EUR / 100 ml
Delivery beginn within 2 - 10 daysDelivery beginn within 2 - 10 days **


Soudal insulation adhesive adhesive foam

Insulation Adhesive is a high-quality, solvent-free, single-component polyurethane adhesive foam (PU foam) designed for efficient, clean, economical, and permanently secure bonding of thermal insulation boards in roofing applications. It ensures optimal thermal insulation and delivers strong initial adhesion even at low temperatures. Suitable for vertical applications, this innovative adhesive foam compensates for uneven surfaces and cures quickly, allowing further processing after just 2 hours. Compared to conventional PU roof adhesives, Insulation Adhesive offers significant weight reduction, space savings, and up to 30% reduction in working time. With precise dosing, one can of adhesive covers up to approx. 14 m² of insulation.

  • Up to 30% reduction in working time
  • High initial adhesion – even at low temperatures
  • Economical consumption thanks to precise dosing
  • Suitable for vertical bonding
  • Usable from +5°C can temperature and -5°C ambient temperature
  • Thermal conductivity of 0.035 W/(m·K) – ideal for filling joints between insulation boards
  • Flexible and non-brittle
  • Compensates uneven surfaces optimally
  • Reduced post-expansion enables fast and reliable alignment of insulation boards
  • Easy and complete disposal of packaging via the P.D.R. system
  • Significant weight reduction and space savings compared to traditional PU roof adhesives or mortar
  • Fast curing – further work possible after approx. 2 hours
  • HFCKW- and FCKW-free (Montreal Protocol) – propellant is completely harmless to the ozone layer
  • Solvent-free
  • Resistant to many solvents, paints, and chemicals
  • Durable, rot-proof, mold- and decay-resistant (not UV-resistant)
  • Water-resistant (not waterproof)
  • Building material class B1 (flame-retardant) according to DIN 4102 Part 1

Application Areas

Designed for efficient, clean, economical, and permanently secure bonding of thermal insulation boards made of polystyrene (EPS + XPS), polyurethane, and phenolic resin rigid foam in construction. Ideal for filling cavities between insulation elements. Suitable for bonding insulation boards in flat roofs, perimeters, facades, drainage elements, basement ceilings, and more.

Processing Instructions

Protect adjacent surfaces before starting work. In strong winds, ensure that the lightweight adhesive does not contaminate nearby components or objects. Screw the can firmly onto the gun thread and shake vigorously about 30 times with the gun pointing downward to mix contents thoroughly and optimize adhesive quality. Repeat shaking after longer interruptions. Adjust the adhesive bead to approx. 30 mm diameter using the gun’s adjustment screw. Apply directly to the substrate, keeping the gun vertical. At least 3 beads per m² are required; increase adhesive quantity in edge areas or under higher wind suction loads (DIN 1055, Part 4). Maintain a 1–2 cm distance between nozzle and substrate during application. Press insulation boards within approx. 8 minutes. Lightly spraying the adhesive bead accelerates curing. Fill all open joints with adhesive. Do not load or walk on bonded areas during curing (approx. 2 hours). Remove excess cured adhesive with a sharp knife.

Processing Temperature

  • -5ºC to +35ºC (surface temperature)
  • +5ºC to +25ºC (can temperature) – optimal +15ºC to +25ºC

If necessary, slowly bring the can to optimal temperature using cool or warm water.

Cleaning: Use Gun Cleaner & Foam Cleaner before curing; afterwards remove with PU Remover or mechanically.
Repair: Possible with Insulation Adhesive.

Standards and Approvals

  • Building material class B1 (DIN 4102-1), Test certificate P-SAC 02/III-276 (MFPA, Leipzig)
  • Adhesion strength test report No. 09-008 (IFBT, Leipzig)

Storage

12 months from production date in unopened packaging when stored cool (+5ºC to +25ºC) and dry. Store cans upright to prevent valve blockage. Seal opened containers tightly and use promptly.

Delivery Form

750 ml aerosol spray can (12 cans per carton)

From August 24, 2023, appropriate training must be provided before industrial or commercial use. See the foam can for more information.

FlammeAusrufezeichenGesundheitsgefahr
Gefahr
Extrem entzündbares Aerosol.Behälter steht unter Druck: kann bei Erwärmung bersten.Kann vermutlich Krebs erzeugen.Gesundheitsschädlich bei Einatmen.Kann die Organe schädigen bei längerer oder wiederholter Exposition.

Be the first to review this product.

Customers who bought this product also purchased

We Also Recommend