Product information Ottoseal M390 floor joint sealant:
Ottoseal M390 is the ideal floor joint sealant that cures without shrinkage, is extremely elastic and can be sanded and painted over after curing. Ottoseal M390 for sealing floor and connection joints indoors and outdoors.
Very high notch strength and tear resistance. Withstands high mechanical loads
Good chemical resistance Can be used in areas subject to high chemical stress
Very good adhesion to many materials Can be used on many materials without pretreatment
Hardens with virtually no shrinkage. No reworking and no fillets that tend to become dirty
Extremely elastic. Compensates for movements
Low odor, pleasant to process
Silicone-free No interactions with commercially available parquet coatings
Isocyanate free
Good weather and aging resistance For long-lasting indoor and outdoor applications
Can be sanded and painted over after curing. Visually flawless joint adjustment
Areas of application Ottoseal M390:
Expansion and connection joints on parquet, laminate, wooden planks and cork floors
Stress-balancing sealing of floor and connection joints indoors and outdoors on pedestrian paths, balconies, terraces and public areas
Sealing expansion joints between concrete slabs
Sealing of movement and connection joints subject to high mechanical loads that are exposed to stationary loads or rolling traffic, e.g. in warehouses and production halls, workshops, courtyard areas, car washes, parking decks, underground garages, etc.
Sealing of highly chemically contaminated floor and connection joints, e.g. in dairies, slaughterhouses, beverage and food factories, commercial kitchens, etc.
Sealing joints on parquet, vinyl, plastic and laminate floors
Standards and tests:
Tested according to EN 15651 - Part 4: PW EXT-INT CC 25 HM
Tested according to EN 15651 - Part 1: F EXT-INT CC 25 HM
EMICODE® EC 1 Plus - very low emissions
Declaration of harmlessness - tested for use in the food-related sector (ISEGA Forschungs- und Versuchs-Gesellschaft mbH, Aschaffenburg)
Suitable for applications according to IVD data sheet No. 1+8+21+35
For classification according to building certification systems, see sustainability data sheet
French VOC emission class A+
Tested fire behavior according to EN 13501: Class E
Processing:
Processing temperature: +5ºC to +35ºC.
Application method: Spray with a hand gun, compressed air gun or cordless gun.
Cleaning: With white spirit before curing, then with silicone remover or can be removed mechanically.
Smoothing: Use smoothing agent and scraper to prevent skin formation.
Special instructions:
Before using the product, the user must ensure that the materials/materials in the contact area are compatible with it and with each other and do not damage or change (e.g. discolor). For materials that are subsequently processed in the product area, the user must clarify in advance that their ingredients or vapors cannot lead to any impairment or change (e.g. discoloration) of the product. If necessary, the user must consult the respective manufacturer of the materials/materials. Paints, varnishes, plastics and other coating materials must be coated with the adhesive/sealant
be tolerable. For oiled surfaces and wood containing oil, we recommend carrying out preliminary tests with regard to compatibility and adhesion. Avoid contact with bituminous and plasticizer-releasing materials such as butyl, EPDM, neoprene, insulating and black paints. If there is heavy traffic (e.g. forklift trucks), it is recommended to cover the elastic joints with a protective profile (T-profile) or a protective plate. For heavily used floor joints over 15 mm wide, we generally recommend the use of protective panels. Edge protection profiles can be used to protect the edges of joints in concrete and screed
Joint edges must be chamfered. Important information about sealing floor joints as well as construction sketches is contained in IVD information sheet No. 1. When working with high-pressure cleaners, maintain a distance of at least 50 cm between the spray nozzle and the sealant. Before mechanical stress, the sealant must harden for at least 24 - 48 hours, depending on the depth of the joint. Appropriate protection must be provided during this time. When working with high-pressure cleaners, maintain a distance of at least 50 cm between the spray nozzle and the sealant.
Storage:
Can be stored in a cool and dry place for at least 18 months.
Chemical resistance:
Ammonia (10%) short-term resistant (72 hours)
Ammonia (30%) not resistant
Petrol not resistant
Distilled water resistant
Diesel short-term resistant (72 hours)
Acetic acid (10%) confirmed for a short time
ndy (72 hours)
Ethylene glycol resistant
Isopropanol not resistant
Saline solution, resistant to saturation
Tap water resistant
Machine oil resistant
Lactic acid (10%) not resistant
Sodium hypochlorite (13%) resistant
Phophoric acid (10%) resistant
Resistant to phosphoric acid (30%)
Rapeseed oil resistant
Hydrochloric acid (10%) resistant
Hydrogen peroxide (10%) resistant
Delivery form:
310 ml cartridge (20 Ktu. per cartridge)
Color:
Bahama beige, basalt, concrete gray, dark brown, dark oak, light oak, rustic oak, pebble gray, cherry tree, titanium gray