Soudal Soudafoam Gun B2 PU Foam – Professional Pistol Foam
Soudal Soudafoam Gun B2 is a high-quality polyurethane foam designed for sealing and installing window frames and door frames, filling cavities such as wall penetrations, roof extensions, and pipe ducts, as well as insulating in cold room and refrigerated vehicle construction. Applied with a professional dosing gun, this PU foam ensures excellent dimensional stability, outstanding yield, and a fine foam structure. Our best-selling PU foam is especially popular thanks to its unbeatable price-performance ratio.
Key Features
- Wide adhesion spectrum
- Chemical resistant
- CFC-/HCFC-free
- Gap filling
- Sound and thermal insulating
- Self-expanding
- Plasterable and paintable
Applications
- Insulation in refrigerated vehicle and cold room construction
- Fixing and filling in apparatus and metal construction as well as electrical installation
- Mounting and foaming of window and door frames, window sills
- Soundproofing
- Foaming cavities such as wall penetrations, roof extensions, door frames, pipe ducts, roller shutter boxes, etc.
Standards and Approvals
- Building material class B2 (DIN 4102-1), Test certificate P-SAC 02/IV-010 (MFPA Leipzig)
- Thermal conductivity (DIN 52612), Test certificate 060234.1-Hu (MPA Bau Hannover)
- Joint sound insulation: RST,w (C;Ctr) = 60 (-1;-3) dB (10 and 20 mm joint width), Test report 16731013/1 (ift Rosenheim)
- Water vapor permeability (DIN EN ISO 12572), Test report 51031013/3 R1 (ift Rosenheim)
- Air permeability (DIN 18542-based), Test report 10531013/2 (ift Rosenheim)
Suitable Substrates
Compatible with common building substrates such as concrete, masonry, stone, plaster, wood, metal, polystyrene, PUR rigid foam, polyester, and rigid PVC. Not suitable for PE, PP, PTFE, and silicone. Surfaces must be load-bearing, clean, dust- and grease-free. Lightly moistening surfaces improves adhesion, curing, and foam cell structure. Always perform an adhesion and compatibility test first.
Application Instructions
Cover adjacent surfaces before starting. Screw the can firmly onto the gun thread and shake vigorously (approx. 30 times) to mix contents and optimize foam quality. Adjust foam bead with the adjustment screw and apply using the trigger. Fill joints or cavities only about one-third, as the foam expands. Spray fresh foam with water to improve cell structure, curing, and yield. Cut off excess cured foam with a knife.
- Application temperature: +5°C to +35°C (surface and can temperature)
- Optimal temperature: +15°C to +25°C
- If necessary, slowly bring the can to optimal temperature using cool or warm water
- Cleaning: with Gun Cleaner & Foam Cleaner before curing; afterwards with PU Remover or mechanically
- Repair: with PU Gun Foam
Notes
Cured polyurethane foam should be protected against UV exposure by painting or sealing with sealants (e.g., silicone, polyurethane, acrylic, or MS polymer).
Storage
Shelf life: 18 months from production date in unopened packaging when stored cool (+5°C to +25°C) and dry. Store cans upright to prevent valve sticking. Opened containers must be sealed tightly and used quickly.
Packaging
750 ml aerosol spray can
Color
Yellow