Precise Application of Sealants and Adhesives: With the right nozzle tip, you control flow rate, bead width, and accessibility in joints, corners, and narrow gaps. Cartridge Nozzle
Important: Choose the nozzle tip based on material, cartridge type, thread/connection, and desired outlet size.
Selection Criteria
Compatibility: Connection fitting the cartridge (e.g., standard cartridge thread, system nozzles).
Cut Shape: Round or V-cut, diameter in mm for the desired bead width.
Material: PE/PP for disposable use, durable blends for precise cuts.
Shape: Straight, conical, or angled for hard-to-reach areas.
Application: Suitable for silicone, acrylic, PU, MS polymer – matched to viscosity.
Advantages
Clean Cut: Open the tip with a cutter at the desired angle, avoid burrs.
Dosing Control: Smaller opening for precise lines, larger for faster coverage.
Interchangeable Tips: Use a new tip when changing materials to prevent cross-contamination.
Discover everything you need to know about nozzles for 1K and 2K cartridges: differences, applications, compatibility, sizes, and selection tips. Our goal is to help you find the right nozzle for clean, precise application of sealants, adhesives, and resins.
Basics and Differences
A nozzle controls the material flow and bead geometry. 1K nozzles are usually conical or straight attachments for standard cartridges. 2K nozzles integrate static mixers that homogenize the two components before extrusion.
1K Nozzles
Applications: Sealants, acrylic, silicone, PU, MS polymers
Choosing the right nozzle depends on cartridge type, cartridge system, material viscosity, and desired bead width. Check connection standard, mixing system (for 2K), nozzle length, and material.
Cartridge system: 1K standard (e.g. 290–310 ml), 2K systems (e.g. 50 ml, 200 ml, 400 ml) with bayonet or thread connection
Outlet diameter: Typically 1–12 mm; conical nozzles are cuttable – the shorter, the larger the outlet
Length: Short for precise control, long for hard-to-reach areas
Material: PP/PE for disposable use; solvent-resistant versions for aggressive media