Product info:
Fix ALL High Tack Clear is the transparent adhesive for all types of high-performance bonding - for all types of materials and on all common surfaces. It combines high initial adhesion with exceptional final adhesion.
Easy to spray, very easy to process
High initial adhesion, less support required.
Fast curing
Very low emissions, EC1+ certified
high shear strength after complete curing (no primer)
Remains elastic after curing and is very durable
Odorless.
Does not contain isocyanates and silicones
Solvent-free
Good adhesion on slightly damp surfaces
Application areas:
Transparent and elastic direct bonding of many materials
For dynamically stressed, structural bonds where a high initial adhesive strength is required.
Bonding and assembly in the construction and metal industries
Structural bonding of vibrating structures
Gluing and assembling a wide variety of materials, plates, panels, decorative strips, wooden structures on various surfaces.
Substrates:
Substrates: all common building substrates, treated wood, metals, PVC, plastics Condition: load-bearing, clean, dry or slightly damp, free of dust and grease. Surface Preparation: Porous surfaces for water-loaded applications should be primed with Primer 150. If necessary, pre-treat non-porous surfaces with a Soudal activator or cleaner (see technical data sheet). Not suitable for PE, PP, PTFE (e.g. Teflon®), bituminous substrates, copper or copper-containing materials such as bronze and brass. NOTE: Bonding plastics such as PMMA (e.g. Plexi® glass), polycarbonate (e.g. Makrolon® or Lexan®) that are under stress can cause stress cracks or network cracks to form in these substrates. Fix ALL High Tack Clear is not recommended for these applications. It is advisable to first carry out an adhesion and compatibility test on every surface
Processing:
Installation method: hand gun, air gun or cordless gun.
Processing temperature:
+0°C (frost-free) to +40°C (ambient temperature)
+0ºC (frost-free) to +35ºC (adhesive surface temperature)
Curing occurs from outside to inside due to humidity at room temperature and slows down over time. At low temperatures and/or low humidity, curing is significantly delayed!
Cleaning: with SURFACE CLEANER, SWIPEX or white spirit before curing, then with SILICONE REMOVER or can be removed mechanically.
Smoothing: with smoothing agent or natural stone smoothing agent to prevent skin formation
Repair option: with FIX ALL HIGH TACK
Remarks:
Fix ALL High Tack Clear can be painted over with water-based paints. However, due to the variety of colors and varnishes available, it is strongly recommended that you carry out a compatibility test before use.
The drying time of alkyd resin-based paints can be longer.
Fix ALL High Tack Clear can be used on a variety of surfaces. Because certain surfaces such as B. Plastics, polycarbonate, etc. can vary depending on the manufacturer, it is recommended that you carry out a compatibility test in advance.
Release agents, processing aids and other protective agents (e.g. protective films) are often used in the production of plastics. These must be removed before gluing. For optimal adhesion, the use of Surface Activator is recommended.
Fix ALL High Tack Clear is not suitable for use on natural stone.
Fix ALL High Tack Clear cannot be used as a sealant for window glazing.
Not suitable for bonding aquariums.
Not suitable for applications with permanent water exposure.
Fix ALL High Tack Clear has good UV stability but can also discolor under extreme conditions or after prolonged UV exposure.
Fix ALL High Tack Clear can cause discoloration under extreme conditions or after very long exposure to UV light.
Discoloration may occur due to chemicals, high temperatures or UV radiation. Color changes have no impact on the technical characteristics of the product.
Avoid contact with bitumen, tar or other materials that release plasticizers, such as: B. EPDM, neoprene or butyl, as this can lead to discoloration and loss of adhesion.
When using different reactive joint compounds, the first joint compound must be completely hardened before using the next one.
Storage:
Store in unopened packaging in a cool (+5ºC to +25ºC) and dry place. Close opened containers well and use quickly.
Delivery form:
290 ml PE cartridge (12 per box)
Color:
transparent