Product information:
Ottocoll M595 MS polymer adhesive for surface bonding and tension-equalizing bonding of a wide variety of materials. For surface and tension-equalizing bonding of a wide variety of materials, such as wood, wood-based materials, glass, metals (e.g., aluminum, stainless steel, anodized aluminum, brass, copper), plastics (e.g., rigid PVC, GRP), mineral substrates (e.g., brick, tile, ceramic), and fire-resistant building boards (plasterboard, etc.).
Suitable for troweling - Quickly and easily applied with a notched trowel.
Fills uneven surfaces - Rough surfaces possible. Sound-insulating effect by filling cavities
For many substrates without pretreatment - No pretreatment required, even on absorbent substrates, e.g., concrete
Stress-equalizing - Compensates for movement
Low-odor - Pleasant to work with
Adheres even to damp substrates - No lost working time due to drying of the substrate
Silicone-free
Isocyanate-free
Solvent-free
Areas of application:
Full-surface bonding of wall cladding panels indoors, e.g., in sanitary, kitchen, and catering areas and in cold storage rooms
For full-surface and stress-equalizing bonding of a wide variety of materials such as wood, wood-based materials, glass, metals (e.g., aluminum, stainless steel, anodized aluminum, brass, copper), plastics (e.g., rigid PVC, GRP), mineral substrates (e.g., brick, tile, ceramic), fire-resistant building boards (plasterboard, etc.)
Pretreatment:
The requirements for elastic sealants and Bonding depends on the respective external influences. Extreme temperature fluctuations, tensile and shear forces, repeated contact with water, etc., place high demands on an adhesive bond. In such cases, if recommended (e.g., +/OTTO Primer 1216) is available, the use of the primer mentioned is advisable to achieve the most resilient bond possible. For surface bonding, sufficient bond strength can be achieved on substrates with a primer recommendation due to the size of the bonding surface (tests/preliminary trials recommended).
Application Note:
Fix the materials to be bonded until the adhesive is fully cured. For surface application, the size of the notched trowel should be selected to ensure sufficient adhesive is applied and both substrate surfaces are sufficiently wetted with the adhesive after joining. Insufficient wetting has a negative impact on the bond strength. The curing time can be shortened by applying moisture and increasing temperatures. Moistening is required for the surface bonding of moisture-impermeable materials and to accelerate curing. Due to the multitude of possible influences during processing and application, the processor must always conduct a test application and application. The specific use-by date can be found on the container label and must be observed. We recommend storing our products in their unopened original containers in a dry place (< 60% RH) at a temperature range of +15°C to +25°C. If the products are stored and/or transported for extended periods (several weeks) at higher temperatures/humidity, a reduction in shelf life or a change in the material properties cannot be ruled out. Reseal opened containers after use. If a skin has formed on the adhesive, it must be completely removed before processing (do not stir in!).
Consumption:
Adhesive quantity [g/m²]: 750g. Equivalent to 500 ml with B3 notched trowel.
Delivery:
580ml aluminum foil bag (20 bags per carton)
Color:
White