Important Product Groups
Sealants (Silicone & Polyurethane)
Ideal for joints and connections. Key features: mold-resistant formulation, movement absorption, and strong adhesion to substrates.
Sealing Tapes & Collars
Reinforce transitions to wall/floor drains and pipe penetrations. Usually self-adhesive or integrable into sealing systems.
Liquid Sealants / Bonding Primers
Available as 2-component or 1-component coatings for shower areas beneath tiles. They form a waterproof protective layer.
Sealing Membranes & Fleece
Pre-fabricated sealing sheets used as a system with adhesive and joint tape for reliable waterproofing.
Installation & Preparation Tools
Degreasers, primers, cartridge guns, joint smoothers, and measuring tools for professional application.
Buying Guide — What to Consider
- Substrate: Stone, screed, concrete, drywall? Not all sealants adhere to gypsum-based boards without primer.
- Movement absorption: How much movement does the joint experience? (e.g., wall/floor connections require more elastic products).
- Mold resistance: Anti-mold additives are essential in wet areas.
- Curing & pot life: Important for fast projects or cold environments.
- Compatibility: Sealing tape and liquid sealant must match as a system (follow manufacturer recommendations).
- Odor & VOC: Low VOC emissions are beneficial in living spaces.
Tip: For new builds or complete renovations, system solutions (manufacturer sealing sets) are recommended to ensure compatibility between sealant, tape, and liquid waterproofing.
Quick Guide: Sealing in 8 Steps
- Preparation: Clean surfaces, remove old joints/loose parts, keep dry and dust-free.
- Apply primer: Use bonding primer on non-absorbent or gypsum-based substrates.
- Insert sealing tapes: At critical corners, wall-floor transitions, and pipe penetrations.
- Apply liquid waterproofing: Two coats, crosswise, respecting drying times.
- Seal joints: After waterproofing, seal joints with suitable sanitary silicone.
- Tile & grout: Lay tiles only after full curing of waterproofing.
- Inspection: Perform water load test (e.g., leave water for 24h) before furnishing.
- Maintenance: Inspect joints annually and repair small cracks promptly.
Product Recommendations by Application
- Joints & connections: Sanitary silicone (mold-resistant), 100% neutral-curing silicone for sensitive surfaces.
- Floors/Showers (under tiles): 2K liquid waterproofing or specialized sealing membrane systems.
- Temporary repair: Sealing putty / repair mortar for small damages before resealing.
- Drain sealing: Sealing collars + suitable adhesive.
Common Mistakes — And How to Avoid Them
- Lack of system compatibility: Different manufacturer products may not work chemically together → always check system recommendations.
- Premature loading: Waterproofing requires curing time — respect installation times.
- Moist substrate: Do not seal on damp surfaces — dry first or initiate drying measures.
- Only superficial cleaning: Remove old, porous sealants completely, otherwise new waterproofing will not adhere properly.
FAQ — Frequently Asked Questions
When is liquid waterproofing necessary?
Always where water regularly contacts the substrate (walk-in showers, shower floors). For simple connection joints, sealant may suffice.
Can I use normal sanitary silicone instead of a sealing membrane?
No. Silicone seals joints but does not replace full-surface waterproofing under tiles with constant water exposure.
How long does a professionally executed waterproofing last?
With correct application and proper maintenance, several decades; however, joints and transitions should be checked periodically.