Ottocoll S16 mirror adhesive 310ml mint white

model
S16-04-C97
manufacturer
OTTO Chemie
OTTO Chemie

Ottocoll S16 Mirror Adhesive ✔ 1-component, neutral-curing silicone ✔ Mirror-compatible ✔ Adheres to many materials ✔ Elastic ✔ Suitable for indoor and outdoor use


10,59EUR / cartridge
baseprice: 3,42EUR / 100 ml
incl. 19% VAT plus shipping costs (to DE)
Scaled Prices
from 20 Kartuschen10,06EUR - you save 0,53EUR, baseprice: 3,25EUR / 100 ml
Delivery beginn within 2 - 10 daysDelivery beginn within 2 - 10 days **


Ottocoll S16 mirror adhesive 310ml mint white

Ottocoll S16 Mirror Adhesive

Ottocoll S16 Mirror Adhesive bonds securely to all common mirror coatings without primer. Also suitable as an adhesive for Plexiglas® mirrors. Ottocoll S16 does not damage mirror coatings!

  • Neutral-curing RTV-1 silicone adhesive based on alkoxy
  • Adheres to all standard mirror coatings without primer
  • Does not damage mirror coatings

Applications

Stress-compensating bonding of mirrors to materials such as ceramics, glass, plastics, stainless steel, aluminum, wood, concrete, and more. Also suitable for Plexiglas® mirrors.

Special Notes

Before use, ensure that all materials in contact with the adhesive/sealant are compatible and will not be damaged or altered (e.g., discoloration). Only mirrors that comply with DIN 1238 5.1 and DIN EN 1036 should be bonded. During curing, small amounts of alcohol are released—ensure good ventilation. After curing, the product is odorless, physiologically safe, and neutral. Avoid contact with bitumen-containing or plasticizer-emitting materials such as Butyl, EPDM, Neoprene, insulating or black coatings. Paints, lacquers, plastics, and other coatings must be compatible with the adhesive/sealant. For mineral substrates, use OTTO Primer 1105; for coated chipboards, OTTO Primer 1216 is usually required. Ottocoll S16 adheres to standard mirror coatings without primer and provides excellent adhesion to Plexiglas® mirror coatings.

Surface Preparation

Bonding surfaces must be clean and free of release agents, preservatives, grease, oil, dust, water, old adhesives/sealants, and other contaminants. Non-porous substrates: clean with OTTO Cleaner T and a lint-free cloth. Porous substrates: mechanically clean with a steel brush or grinding disc. Mineral substrates must be pretreated with OTTO Primer 1105 to block alkalinity and improve adhesion. For coated chipboards, OTTO Primer 1216 is generally required. Adhesion on glazed ceramics is possible without primer.

Application Instructions

Apply adhesive in vertical strips, not dots or full-surface. Strip length should not exceed 200 mm. At least 3 strips per m² of mirror surface, each max. 10 mm wide, spaced at least 200 mm apart to allow air circulation. Minimum bonding area: 10 cm² per kg of mirror weight. Maintain a minimum gap of 1.6 mm between mirror and substrate using spacers. Required strength is achieved after approx. 48 hours (23 °C, 50% RH). Temporary fixation may be necessary using removable supports or adhesive tapes.

Processing

  • Application temperature: +5 °C to +35 °C
  • Application method: Hand gun, compressed air gun, or battery gun
  • Cleaning: With turpentine substitute before curing; after curing, remove mechanically or with silicone remover
  • Smoothing: With smoothing agent and spatula before skin formation

Storage

Store cool and dry. Shelf life: at least 12 months.

Delivery Form

310 ml cartridge (20 cartridges per carton)

Color

Mint white

Be the first to review this product.

Customers who bought this product also purchased

We Also Recommend